2014 silverado wont stop beeping when I unlock using remote

I would contact the locksmith that did the work and explain the issue you are having. Chances are the contactor is bent and needs straightened.

You have a failed door ajar sensor is my guess, a dealer can use a scan tool to verify this is the problem.

Factory Remote Starter Quits After 5 Seconds - Diesel Place ...

www.dieselplace.com/.../340832-factory-remote-starter-quits-after-5-sec...

Nov 23, 2009 - 11 posts - ‎8 authors
On my 2007.5 Duramax, the factory remote has been working fine ... I tried this morning again with the remote starter while sitting in the truck and same thing, turned off ....2008 Silverado 2500 HD CCLB Duramax 6 Spd Allison 4X4 Z71 ... shut off engine", basically its doing it foryou as your not in the truck to ... check engine light on wont shift
7 posts
Oct 28, 2011
remote start
11 posts
Oct 14, 2008
More results from www.dieselplace.com

Factory Remote Start Problem - 1999-2006 & 2007-2013 Chevrolet ...

www.gm-trucks.com/forums/topic/114985-factory-remote-start-problem/

Jun 12, 2010 - 10 posts - ‎8 authors
Factory Remote Start Problem - posted in 1999-2006 & 2007-2013 ... Sounds like you may have an intermittant code coming in and the dealer should be able to pull it out.2008 Sierra SLT ECSB Z71, Corsa Touring, and GMPP CAI .... the remote start button again the truck WILL shut off and the only way to ... Burning smell, white smoke - 2014 / 2015 / 2016 ...
15 posts
Jan 11, 2014
2008 Silverado Electrical Issue
15 posts
Aug 19, 2012
Making Factory Remote Start Run Longer
15 posts
Dec 21, 2010
2000 Sierra, Starts Then Dies - Code 1631
7 posts
Dec 4, 2008
More results from www.gm-trucks.com

Maybe there is a broken wire to the tailgate

Many possibilties. Any codes set? check EGR, IAC, coil/module, coolant temp sensor, tune up items. Any certain times it fails? Rain, cold, etc?

lock vehicle with either remote or use lock button on door inside car...then goto passenger side door and unlock it with key..this should reset it

Try pressing both the open and lock buttons on your remote simultaneously. Works on some asian cars.

go to the chevy dealer and ask for a picture of the manual page with the fuse listing

With alarm activated your ignition is disabled.Find the combination to disable it.With GM's you hold opposing buttons on the fob till it beeps twice. The dealer should help for no charge.

Check the relays for the power unlock. They are in one of the fuse panels. Push the door unlock button and find the relay that is clicking. This should fix your problem