Get a Chilton manual for your 2001 Blazer
SOURCE: Need vacuum diagram
I can't send you a diagram but I can tell you the basics that should get you mobile. Take a vacuum line from the lower front of your carb and hook it to your distributer vacuum advance. Take another from the front of your carb and run it to your EGR valve. It should be beside the carb on the intake manifold. At the rear of your carburator there is a large line coming out. It should be steel. It provides vacuum boost to your power brakes. Hook it up. Make sure all other vacuum outlets on the carb and intake are blocked off and you should be able to get mobile.
SOURCE: 1989 Chevy S10 Blazer, 4.3L V6. 4wd not working.
under the battery is where you need to check first,then follow it down around the right front wheel well,
SOURCE: vacuum hose diagram for a 2001 Chevy Blazer
look on google i can fing everything there if you want email me with your emailaddres i will try to find it for you
SOURCE: I need a vacuum diagram for a 1988 Chevrolet S-10
Fig. 44: 1989 2.8L TBI engine - federal altitude
Fig. 46: 1989 2.8L TBI engine - California
Fig. 47: 1989 2.8L TBI engine - leaded fuel export without catalyst
Hope help with this (remember rated this).
655 views
Usually answered in minutes!
all i can tell is to do what i did and get a Chilton Manual for your 2001
as i was saying ,get that manual for your 2001 Blazer,it has everything you need to know.
Thanks anyway. The manuals don't show any short cuts or details.
×