2002 Ford SVT Focus Logo

Related Topics:

A
Anonymous Posted on Apr 16, 2014

Reset change oil soon light

Does it come with a oil chabnge light soon

2 Related Answers

Anonymous

  • 783 Answers
  • Posted on Apr 03, 2009

SOURCE: reset change engine oil soon light 2008 ford Expedition XLT

If you have the optional message center it is on page 144 of your owners manual. Press and release the SETUP
control to display “OIL LIFE =
XXX% then HOLD RESET = NEW”.

If you have the standard message center this begins on page 126 of your owners manual.

Ad
emissionwiz

Marvin

  • 85242 Answers
  • Posted on Jun 05, 2010

SOURCE: Service Engine Soon light reset.

The Service Engine Soon light comes only when the engine computer control unit (called the PCM) senses a fault in the electronic controls of the engine and/or the emission system, it is not related to the oil change, there are about 200 possible faults that turn the light on, to know what has developed a problem you must have the system tested, this is called an OBD2 fault code test, Kragen and Autozone parts stores do this testing for free.


Testimonial: "Thanks! I guess the person that told me it was an oil change light was not quite up to speed. I'm off to AutoZone."

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2helpful
3answers

Reset oil change milage

GM OIL LIFE SYSTEM - RESETTING
The engine oil life monitor will indicate when to change the engine oil - usually between 5 000 km (3,000 miles) and 16 000 km (10,000 miles) since the last oil change. Under severe conditions, the "CHANGE OIL SOON" light may be displayed before 5 000 km (3,000 miles). The vehicle must not be driven more than 16 000 km (10,000 miles) or 12 months without an oil change.

Reset the oil life monitor when the oil has been changed, use the following procedure:
  1. Turn the ignition key to the RUN position.
  2. Fully push and release the accelerator pedal 3 times within 5 seconds.
  3. If the Change Oil Soon light flashes, the system is resetting.
  4. Start the vehicle.
  5. The oil life will change to 100%.
  6. If the Change Oil Soon light comes back on, the system has not reset. Repeat the procedure.
tip

Pontiac service light 1983-01

Firebird

1998-01

To reset the "CHANGE OIL" light, press and hold the "TRIP/OIL RESET" button on the instrument panel for 12 seconds. When the light flashes and goes out, the system is reset.


Grand Am


1999 -01

To reset the Change Oil light, open the driver's side instrument fuse panel and turn the ignition on. Press the "RESET" button and release. The light will flash. Press the button again and the system will be reset.


Grand Prix


1999-01

Driver Information Center If Equipped). Turn the ignition to ON without starting the engine. Fully press and release the accelerator pedal three times within five seconds. If the CHANGE OIL SOON indicator flashes two times, the system is resetting. Turn the ignition key to OFF, then start the vehicle. If the CHANGE OIL SOON indicator comes on and stays on, repeat the procedure. To reset the OIL LIFE indictor if equipped with a Trip Computer: Press the trip MODE button until the light appears next to OIL LIFE. Press and hold the trip RESET button until the oil life percentage changes to be 99 percent.


Grand Prix


1997-98

To reset the oil life indicator, press the "MODE" button until the light next to "OIL LIFE" is lit. Press and hold "RESET" for 3 seconds until oil life percentage is 100%.


Grand Prix SE


1997

Turn the ignition on, but do not start the vehicle. Within 5 seconds, push the accelerator to the floor 3 times. Turn the ignition off. Start the car and the Change Oil Soon indicator light will be reset.


Grand Prix

w/ Trip Computer

1988-93

To reset "CHANGE OIL", "CHANGE OIL FILTER", or the mileage of either on the Trip Compute, continually press the "SERVICE" or "SYSTEMS CHECK" button until the item appears with the mileage below it. Then press the "RESET" button and the mileage will be reset to the maximum value. If you want to reduce this value, hold the "RESET" button down and the mileage will count down. Release the button at the mileage you would like to observe.


Bonneville,
6000

w/ Driver Information Center

1983-91

To reset "CHANGE OIL SOON" or "OIL FILTER" or to adjust the mileage on the Driver Information Center, continually press the "DIC" button until either message appears with the mileage below it. At this point, hold down the button. In 5 to 10 seconds, the mileage will count down. When it passes 0, it will cycle back to a maximum figure. Release the button when the mileage gets to the service interval you'd like to observe. If "CHANGE OIL" or "OIL FILTER" already appears, just hold the button down to reset the mileage. "CHANGE OIL" and "OIL FILTER" are reset separately.













3helpful
1answer

How do I reset the change oil light after changing the oil. It did not go out.

Try this and if it does not work let me know.

1. Turn the ignition key to the "ON" position without starting the engine.
2. Fully press and release the accelerator pedal three times within five seconds.
3. If the CHANGE OIL SOON indicator flashes two times, or the display reads "OIL LIFE INDEX RESETTING 100%" then the system is resetting.
4. Turn the ignition key to "OFF", and then start the vehicle.
5. If the CHANGE OIL SOON indicator comes on and stays on, or CHANGE OIL SOON is displayed then the system did not reset and repeat the procedure.

1. To reset the OIL LIFE indictor if equipped with a Trip Computer, press the TRIP MODE button until the light appears next to OIL LIFE.
2. Press and hold the trip RESET button until the oil life percentage changes to 99%.
3helpful
3answers

How to reset the oil life monitor

1994-99 BUICK LESABRE
CHANGE OIL SOON Light
1. CHANGE OIL SOON light will come on when engine oil has broken down enough to require changing. After changing oil, reset oil life display.
2. To reset light, turn ignition on. Open glove box to access oil reset button. Press and hold oil reset button in glove box for at least 5 seconds, but not longer
than 60 seconds. The CHANGE OIL SOON light will flash 4 times to indicate light has been reset.
6helpful
4answers

How to reset the change oil light for a 2007 lincoln town car. Hitting reset button doesn't do it.

FIRST press and release the setup button to display oil life= xxx
then press and hold the reset button for about 2 sec it should then display oil life set to 100%
--------------------------------
Just pressing the reset button when the change oil light comes on while driving will not reset the computer
8helpful
3answers

How do I reset the change oil soon light?

Hi to reset the oil life monitor
turn the key on engine off
push the gas pedal to the floor 3 TIMES WITH IN 5 SECONDS
the light will flash then go out
0helpful
2answers

Reset service engine soon light

oil change might not have they obd2 tester to shut
the light go to auto parts chain store like autozone
tell shut it up for you for free
4helpful
1answer

Change oil light reset?

Hi Shady, here is the procedure for resetting the light.
Resetting Procedure
Follow this procedure to reset the GM Oil Life System™
  1. Turn the ignition to RUN, with the engine off.
  2. Fully press and release the accelerator pedal three times within five seconds.
  3. If the CHANGE OIL SOON light flashes, the system is resetting.
  4. Turn the key to OFF after the light has finished flashing, then start the vehicle.
  5. If the CHANGE OIL SOON light comes back on, the engine oil life system did not reset. Repeat the procedure.
With Trip Computer
  1. Press the MODE button until the light appears next to OIL LIFE.
  2. Press and hold the RESET button for three seconds. The oil life percentage should change to 100 percent.
2helpful
1answer

1999 Pontiac Grand Prix lights are staying on

what is the procedure you are using can you explain it to me?
Resetting Procedure

To reset the CHANGE OIL SOON indicator if equipped with the Driver Information Center (DIC).

  1. Turn the ignition to ON without starting the engine.
  2. Fully press and release the accelerator pedal three times within five seconds.
    • If the CHANGE OIL SOON indicator flashes two times, the system is resetting. Turn the ignition key to OFF then start the vehicle.
    • If the CHANGE OIL SOON indicator comes on and stays on, repeat the procedure.
To reset the OIL LIFE indicator if equipped with a Trip Computer.

  1. Press the trip MODE button until the light appears next to OIL LIFE.
  2. Press and hold the trip RESET button until the oil life percentage changes to 100%.
Hope this helps Ill look into the ABS lights but I do believe that you will need a scan tool to retreive a code to be able to diagnose the reason for the lights



2helpful
2answers

Change Oil Soon light won't go off even after changing the oil.

You are able to reset it. The directions are in your manual:

1. press the options button under the screen utnil ENGINE OIL MONITOR appears on the DIC screen

2. Press the set/reset button to reset the system

The next screen indicates that the engine oil monitor system has been reset.

If the message is still on...try steps again
Not finding what you are looking for?

31 views

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...