Cars & Trucks Logo
J
John rudov Posted on Apr 15, 2014

Gauge lights start up in morning check gauges light comes on. Turn off and restart light goes out and all gauges work. start up and abs and parking brake light on, everything works, also light will go out after you stop and restart sometimes. Dodge 2003 1500 5.7 hemi

1 Answer

pxouellette

Level 1:

An expert who has achieved level 1.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

Problem Solver:

An expert who has answered 5 questions.

  • Contributor 7 Answers
  • Posted on Aug 04, 2014
pxouellette
Contributor
Level 1:

An expert who has achieved level 1.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

Problem Solver:

An expert who has answered 5 questions.

Joined: May 03, 2009
Answers
7
Questions
0
Helped
2215
Points
15

ABS and Brake warning lights intermittent may be caused by a failing wheel speed sensor(ABS Sensor) and /or its connector. You may have one on each wheel hub(4WD) or if 2WD, a sensor may be on the rear axle differential center.

5 Related Answers

Anonymous

  • 1 Answer
  • Posted on Sep 27, 2008

SOURCE: 98 dodge caravan problems

I had the same issue with my dodge caravan and after several attempts by the dealer to fix it, it turned out to be a broken wire. They replaced the relay and it would work for a while and then go blank again. Have the wires checked thoroughly.

Ad

AdvBrakeSys

  • 2 Answers
  • Posted on Dec 04, 2008

SOURCE: Dodge caravan sport 2001

The 2001 Chrysler and Dodge minivan's are plagued with wiring issues, specifically in the brake system where it was redesigned, rerouted, and re-engineered SEVERAL times.

You have a wiring issue (likely wire chaffing in the under carriage).

Anonymous

  • 1 Answer
  • Posted on May 17, 2009

SOURCE: check gauges and no oil pressure in 03 ram hemi 4x4

Had the truck the truck to the shop and they said it was the sensor. I had it replaced and it hasn't screwed up since. If you search out this problem on the net, this is a problem with engine and its oil pressure sensor. Apparently, Chrysler is aware of the problem.

Anonymous

  • 6 Answers
  • Posted on Jun 19, 2009

SOURCE: speedometer when crazy

my 99 had a sensor go bad that had similar symptoms. sensor is in rear "pumpkin". mounted on top. $41 at autozone. look at dodge truck forum, do a search.

Anonymous

  • 434 Answers
  • Posted on Apr 26, 2010

SOURCE: 2004 Dodge Ram 1500 5.7L at start up check gauge

Sounds like the oil pressure sending unit needs replaced.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

2003 dodge 3500 5.9 cummins code po 1652......... need helpppp

there is a reported issue with wire harnesses.
this repair will require systematically working through.
My first guess would point to a module with a bad solder joint.
0helpful
1answer

My whole dash went out on my 2002 gmc envoy all the gauges arent working i checked fuses under the hood they seemed fine. Any advice for these problems?

Does it light up ? When you turn the key on do the warning lights come on ? Check engine , oil , abs , air bag etc... just gauges not working ? Does the vehicle start an run ? With vehicle running is check engine light on ? GM had a problem with the stepper motors that control the gauges . How to repair GM Instrument Cluster Speedometer Gauge Stepper
0helpful
1answer

Mazda 6 abs light on, temperature gauge goes up, hard shifting ATX.

Dont think so here the ABS is a seperate computer,have you washed the car by any chance with a jet wash on the wheels this will often clean the sensors on the wheels for the ABS making the light go out
0helpful
1answer

Mazda 6 abs light on, temperature gauge goes up, hard shifting ATX

Sounds like more than one problem.
The ABS light is on to tell you the abs system is disabled due to a problem. Same goes for the traction control which could be related to the abs system problem. Both systems have to work together.
The temp gauge issue could be a faulty thermostat or the cooling system could be low on anti-freeze.
The shifting problem could be related to either system.
0helpful
1answer

First ABS light then Check engine light, then all gauges go down

Wiggle the key when its in the ignition that when you are parked and not driving and see if that affect the gauge if it does you will need a electrical part of the ignition switch
0helpful
2answers

I HAVE A 1994 BUICK REGAL,WHEN I START THE VEHICLE THE AMP GAUGE STAYS AT ABOUT 6 VOLTS,AND THEN I TURN ON THE PARKING LIGHTS AND IT GOES TO NORMAL ABOUT 14,I TURN OFF THE PARKING LIGHTS AND IT STAYS ON...

replace the voltage regulator
amp gauges read amps or current flow
volte gauges read volts so if the volt gauge reads 6 with the engine running indicates that the regulator is not coming into service until the battery voltage drops and that triggers the regulator
an accredited auto electrician will be able to test the complete charging system and advise on the fault
0helpful
1answer

Fuel guage, temp. gauge , or speedometer do not work. Only happens when the ABS light comes on. If ABS light goes out the gauges all come back on

Could your ignition key be sticking to far forward and staying there when released? I have had cars and trucks do this and it messes up stuff. If it is sticking and not coming back to the on position when starting the vehicle then get out the WD 40 and give ita shot.
I hope this helps, The Raz
0helpful
1answer

2002 gmc van overheatig

It has a leak. Fill up the radiator and the coolant tank. Then restart it and check for leaks.
Not finding what you are looking for?

749 views

Ask a Question

Usually answered in minutes!

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...