Passenger side Mirror is loose, how can I tighten?
The triangel cover on the inside towards the front of the door. pop it off and youll see three 10mm bolts that hold the whole housing to the door.
SOURCE: OUTSIDE PASSENGER SIDE MIRROR. 2001 TAURUS
the Glass element or the glass and backing assembly? if just the glass it is just glued on, Scotch two sided tape works as well, if the Glass and backing fixture it just snaps in and out of the drive motors.
SOURCE: loose mirror on passenger side
there is no way to tighten the mirror, I assume your talkin about it jigglin when you are driving. either replace the mirror or you just have to wing it
SOURCE: need to replace F250 passengers side mirror.
take the door panel off there is 2 to 3 bolts holding it on
SOURCE: How do I install a side view mirror on my F250?
The door panel must be removed to get to the wiring. On a 04 250 you need to: pop off the moulding covering the mirror mounting nuts. Pry the window switch plate forward then up to disconnect it, then unplug it . Rmove the screw behind the switch plate and behind the reflector. Push up on the door panel to remove it.
SOURCE: How do I install a passenger side mirror for a
The directions I suggest are the signal mirrors from Muth Co, they are good directions with pictures.
www.kwmuth.com
Enter your make and year, on the product listing page is a URL to the PDF download of the directions. This will provide some nice directions on removing the door panel, to gain access to the nuts behind the mirror sail panel. Obviously you don't need to remove the glass from the mirror head if you already have the new mirror head complete. It is an easy job, I have done this on my 2001 ( did the Muth install ) as well as my 2006 F-150s.
903 views
Usually answered in minutes!
×