2003 GMC Sierra Logo

Related Topics:

A
Anonymous Posted on Apr 10, 2014

Clean throtle valve on 2003 gmc seirra - 2003 GMC Sierra

5 Related Answers

Anonymous

  • 2187 Answers
  • Posted on Aug 04, 2009

SOURCE: i have a gmc 2003 seirra 2500 and when i turn the

If you hear the sound while turning at low speeds and at any speed you might have a busted CV joint that needs replacing. If this is at mid to high speed turning it may be because of a busted ball joint. You may have to inspect physically the underside of the car to be sure. Ensuring that all joints and bushings are not loose like the ones mentioned and the tie rod that helps the wheel turn. If they are, they might need replacing.

Ad

Anonymous

  • 420 Answers
  • Posted on Sep 15, 2009

SOURCE: my 2003 gmc seirra 4x4 stalls when stopped in

If no check engine light is on is most likely a bad vacume line on the fuel injectors.

matney68

Donnie Matney

  • 426 Answers
  • Posted on Oct 30, 2009

SOURCE: Where is the fuel filter located on gmc seirra

drivers side inner side of frame rail.Around about under drivers seat area

Anonymous

  • 5 Answers
  • Posted on Feb 01, 2010

SOURCE: 1993 Gmc Seirra Power Steering

You will have to remove the serpintine belt off take off the Hoses from the steering box be carefull not to strip them out, use some WD-40 or something the make it easier if they wont come off take your time and work them back and forth, If your just doing the pump then take the hoses off the pump not the steering box, take the retaining bold out of the steering pump and it should come right off.

uprosperto

  • 42 Answers
  • Posted on Dec 12, 2010

SOURCE: 2003 GMC Seirra Duramax Deisel

If it cranks and won't start then it is probably your glow plug system which is used to help with starting as diesel engines have no plugs and rely on compression. It also helps to run a lighter oil in the winter so it will crank faster. You can ohm out the plugs to see if they are broken. I am not sure of the wiring on the GMC but usually diesels have several wired in parallel

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How to tighten belts on 2003 gmc seirra.

The belts are tightened by a belt tentioner assembly, you are probably asking this question because of a squeel, If this is correct change out the belt, and possibly an idler pullly this is common in the sierra's and silverado's
0helpful
1answer

2003 GMC Seirra Duramax Deisel won't start

If it cranks and won't start then it is probably your glow plug system which is used to help with starting as diesel engines have no plugs and rely on compression. It also helps to run a lighter oil in the winter so it will crank faster. You can ohm out the plugs to see if they are broken. I am not sure of the wiring on the GMC but usually diesels have several wired in parallel
0helpful
1answer

My gmc sonoma (1996) 2.2 wants to stall when slowing to a stop and i cant figure out if its the IAC or the egr system do you have any suggestions?

the iac, when you start the truck cold does it idle up and then slowly drop? remove the egr valve and make sure theres no carbon holding the valve open, then drive it with the vale hose dissconected and see if it stalls, if it doesnt stall with the valve hose removed and pluged then i would say the egr valve, but if it still stalls then it may be the valve, also make sure the throtle body and the plate is clean, use old tooth brush and some crab cleaner to clean, do this with engine off, try these things first,
0helpful
2answers

Where is the fuel filter located on gmc seirra

Trace your fuel lines from the gas tank along the inside
of your frame rail.It should be located about 2 or 3 feet
from the tank.
0helpful
1answer

The accelerator pedal is sticking on my 2000 GMC Seirra

take off the air cleaner from the throttle body, take some carb cleaner and a rag ,now manually open the butterfly valve with your hand this will allow you to clean inside. the deposit build up around the valve edge is enough to make the accelarator stick and drive you mental , trust me this is simple but very effective
0helpful
1answer

My 2003 gmc seirra 4x4 stalls when stopped in drive

If no check engine light is on is most likely a bad vacume line on the fuel injectors.
0helpful
1answer

2005 GMC Seirra 4.8l excessive oil consumption.

this is not a very good sign really. if you rev up to about 4-5 thusand rpm (more than usual) while driving in a safe mannor of course and see smoke then you will find the piston rings are probably going. you might al;so want to take into consideration that your valve stem oil seals are all internal as well so no real sign of leakage.so could also be the culprit.
Not finding what you are looking for?

28 views

Ask a Question

Usually answered in minutes!

Top GMC Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

john h

Level 3 Expert

29494 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...