At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
I have the same vehicle. when the sun comes up I will go out and look my self and get back. It should let me post a follow up.I have the same vehicle. when the sun comes up I will go out and look my self and get back. It should let me post a follow up.
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Because there are two different filaments in the bulb, It's like having two bulbs in one, the running /tail lights also typically run on different circuits as well, check all fuses first, if all good replace the bulbs, should be good. If it still does not work with the new bulbs there could be a problem in the circuit to that lamp, but the usual problem is just a bad bulb...
the signal indicator lights are suppose to flash in perticular time interval which is connected to a timer relay when the light flashes faster that means the other light is not working and the relay is getting double the current and moving faster so check the other light either the bulb is fuse or the current is not reaching up to the bulb
I replaced the brake pads on a '94 Chrysler town and country, I had the rotors turned also, I did not use any anti-vibration substance on the shoes. I hear a clicking noise from front brakes.
Start at the front towards the winshield with a very small flat headed screwdriver. Getting under the lip of the light cover in the front pop the 2 front clip down in the front. Do Not do this on the seat side or you brake the clip that turn the light on/off. After poping the front down, side out towards winshield. The blub removes by turning counterclockwise. Blub is a 578
I've never heard of anyone fix the LED lights. When they go, there gone. Just replace the overhead console. It's eazy to replace the console. Th console just pops down. No special clips. Call the salvage yards for one around $35..Get the warranty from the salvage yard Do Not Buy AS IS. Make sure to remove the negitive battery cable before removing. the console. Eveything unplugs eazy from the console
On teh back of the headlight housing there is a interlocking bulb
holder that your wires are attached to. Disconnect the wires, Unscrew
the Bulb holder and replace old bilb with new one. Reassemble and
reattach the wire socket.
its works in 2001 chrysler.. hope so it works in 2005 model also
×