The car will nor start and the dashboard light are all off , the battery is good . the first issue was that when i wanted to start the car the dashboard light were on but when i pressed the ignition button there was nothing just clicks .i checked all the fuses and they seem to be fine, please someone let me know if they had a similar issue.
I would be having a load test done on the battery as it appears that you have a dead cell.
Testimonial: "norman orfallythank you for the feed back however that wasn't the problem Apr 07, 2014 norman orfally norman orfallyAdd a Comment the I Key is showing on the left hand side of the dashboard screen , also no gauges are Apr 07, 2014 norman orfally norman orfallyshowing or moving although the lights inside the car and the radio are working ,when i insert the key in the slot and press the push button all i can see is press the break sign and the I key warning shows Apr 07, 2014 norman orfally norman orfallyis there a fused circuit maybe and if it was whre is the fuse located for the dashboard? Apr 07, 2014"
SOURCE: Dashboard and tail lights out on 97" Nissan Sentra
I took my pathfinder to U-HAUL and asked them to check the towing lights. There was a pinched wire by my tail light and they cut it and changed it out for me, it was $5. I am so glad that I didnt take it to Nissan. My second step was going to be getting a new dimmer switch..but the guy who worked on my car said that wouldnt be the problem. He also told me that replacing a fuse that kept blowing out was dangerous and after the first time to get it checked out. Learn something new every day!!
SOURCE: 1996 Nissan Maxima Clock, Dome Light & Radio went out not working
you need to check the fuse some ?
SOURCE: car won't start
Stang: Nissan had a TSB on weak spark related to the Altima's and Sentra's. It had to do with water getting trapped in the spark plug tubes due to the steam hole vents in the plug wires becoming clogged and/on the wires no longer sealing well to the motor, thus allowing water to accumulate into the plug holes. This would cause a weak spark condition. You would still get an injector pulse as long as the ignition can be triggered.
As far as fuses: There is a box on the driver's side which contains fusible links and fuses. Unless you are checking for power with the ignition on, most of the circuits will be dead because they are switched circuits through the ignition switch. The headlights will be hot without the key on, as will the running lights,horn and brake lights.
However due to the fact that you have light spark and have injector pulse, would tell me that you have power to the ECM. If you want to check circuits, buy a cheap test light and follow the instructions. it is a simple diagnostic tool for checking for open circuits.
Hopeful I might have given you some direction. Good luck.
PS: if you replace plug wires, do so with a good quality wire. I have found that NGK wires and the Original equipment wires seem to be the best quality, lasting the longest. Life time warranty parts mean nothing if they fail at inconvenient times and with frequency. Many of these warranty's are gambles made by parts houses based on the fact that people loose their information, don't keep the cars and or just forgot they had the warranty and went out and replaced the parts again.
129 views
Usually answered in minutes!
thank you for the feed back however that wasn't the problem
Add a Comment the I Key is showing on the left hand side of the dashboard screen , also no gauges are
showing or moving although the lights inside the car and the radio are working ,when i insert the key in the slot and press the push button all i can see is press the break sign and the I key warning shows
is there a fused circuit maybe and if it was whre is the fuse located for the dashboard?
×