what is the torque setting for the cylinder head bolts on a peugeot speedfight 100cc pleasewhat is the torque setting for the cylinder head bolts on a peugeot speedfight 100cc please
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The torque setting for the nuts on a 1996 Peugeot 306 hatchback will depend on the size of the nuts and the type of bolts they are used with. Here are the recommended torque settings for some of the more common fasteners on the Peugeot 306:
Wheel nuts: 80-90 Nm
Engine oil drain plug: 25-30 Nm
Engine oil filter housing: 25-30 Nm
Engine oil cooler hose banjo bolts: 25-30 Nm
Engine oil pump mounting bolts: 25-30 Nm
These torque values are for general reference only and may vary depending on the specific model of the Peugeot 306 and the condition of the fasteners. It is always best to refer to the manufacturer's recommendations for the correct torque settings.
@Kenneth Ella: In my Peugeot 206 1.4 (TU engine series), tightening the thermostat housing bolts with a torque 20 nm was the breaking of the thread in the engine head. I think, correct torque is about 10 nm (8-12 nm).
no problem the correct setting is ,hmm it says tighten to 20nm then 40nm and then slacken off 130? and tighten 130? ,well this the proverbial brown stuff from a cow to me as when i do these engine i pull down with a speed key then a rachet then my 80cm snap on bar so i suppose iam pulling down to around 75/80 lbs per inch but in all honesty i never use a torque wrench as i used to torque heads in ford of dagenham at 18yrs old so three engine a minute i just sort of feel for the bolt stretch and that it really .
what is the torque setting for the cylinder head bolts on a peugeot speedfight 100cc please
×