Is my 2003 range rover 4.4l engine an interference engine?
SOURCE: Range rover 2006 acceleration probs, w message '' reduced engine
encrypted software ----dealer only
SOURCE: how i reset the service engine light on a 2004
There are hidden cheats (just like a video game)
this is cool try it out.
1. ignition off
2.Press and hold trip meter button(left black button) down and turn igniton kry to first position. Keep the button pressed about 5 seconds until the words Oil Service or Inspection reset appears on LCD display.
3. Release the button then press and hold till reset begins to flash
while the display is flashing let go then press again.
the display will read END SIA and your all done.
In practice you have to make the inputs quickly, do not delay as you will have to start over
SOURCE: 2004 Range rover Check Engine Light
The Range Rover actually has 4 oxygen sensors - 2 in front of the Cat and 2 behind the cat - try to check / replace the other 2
SOURCE: 1998 range rover p38 2.5 dse auto engine stalls
Sounds like something is overheating then and possibly a sensor. Not familiar with Rovers but might be a problem with the CAS and/or CPS which tells the ECU the motor is running and when to fire. Also maybe the IAC is bad and when you go from throttle to idle it can't control it and allows it to die.
SOURCE: the service engine soon light
Try this: Switch ignition OFF Press and Hold left instrument panel reset button, switch ignition ON to position 1 Keep reset button pressed for approximately 5 seconds until the LCD displays "RESET SIA". The distance to service and the service type " Inspection" will be displayed. To reset distance the left hand button should be pressed before the 'RESET' message has flashed 5 times. The LCD will display 'END SIA'. Switch ignition off The timing to do this is must be about 5 seconds, if this is not working you can try again. I have a Range Rover 2005 and it worked for me.
260 views
Usually answered in minutes!
×