Question about 1992 Acura Vigor

Open Question

No connection when turn key to start postion

I left my windows down last night and my key in the ignition. We had a surprise rain. When I went to raise the windows. I got no power to anything and when I turned the key to the on position I could not get the key to turn back to the off position and could not remove the key. I tried to jump strart it with absolutely no results.

Posted by Anonymous on


6 Suggested Answers


6ya staff

  • 2 Answers


Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017



  • 1605 Answers

SOURCE: Key Won't Turn in the Ignition

try some DW40 first.
yes! you can change it yourself.
you need to drop the stearing colum, drill out the breakaway screws, reinstall the key cylinder, lock and wiring.
not hard, but it is pain. sepcially the break a way screws.

Posted on Oct 30, 2008



  • 239 Answers

SOURCE: 92 acura will not start when key is turned. Lights come on.

chage selonoid

Posted on Dec 28, 2008


Joel Mallory

  • 145 Answers

SOURCE: 1990 Acura Ledgend (AT) When the key is turned to

needs electrical portion of ignition switch

Posted on Nov 12, 2009


Jose Cada

  • 3530 Answers

SOURCE: 1992 Acura Legend - engine

Welcome to Fixya

There is a huge possibility that there is a problem with your ignition switch. The ON position should supply power to all electrical automotive equipment, such as the fuel pump and engine sensor applications and dash lights. If you turn the key to ON position and non light inside you dash then the problem is the ignition switch.

Thank you for using Fixya!

If you need further help, reach me via phone at

Posted on Dec 28, 2010


Jeffrey Turcotte

  • 8984 Answers

SOURCE: My tsx doesn't start.

Hi, this sounds like the starter solenoid, but on your car the solenoid is integrated with the starter motor assembly. You will need to remove the starter and have it tested at your local parts chain.

If you have the proper equipment, you can test at home as indicated below. Please let me know if you have questions, and thanks for using FixYa.

TSX Models

NOTE The factory sound system has a coded theft protection system. It is recommended that you know your reset code before you begin.

  1. Before servicing the vehicle, refer to the precautions section.
  2. Remove or disconnect the following:

    Negative then the positive battery cables Intake manifold Starter cable from the B terminal Black/white wire from the S (solenoid) terminal Harness clamp and holder Two bolts that mount the starter to the transaxle assembly Starter
To install:
  1. Installation is the reverse of the removal procedure.
    NOTE When installing the heavy gauge starter cable, make sure the crimped side of the terminal end is facing out.
  2. Enter the anti-theft code and radio presets.

    Fig. Starter mounting-TSX models


Posted on Mar 19, 2011

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have a ford Everest trend brand new, it rained last night and I came out to all my windows down and the car soaked the windows were up when I left it ladt

On my vehicle if you hold down the Door Unlock button for 5 seconds, it rolls down all the windows and opens the sunroof. This is great first thing in the morning on a hot sunny day, not so good when it is raining. Check your manual. Do you have children who play with the fob, or keep it in a pocket were something can press the buttons?

Jan 29, 2018 | Ford Cars & Trucks

1 Answer

I got stuck last night. When I turned the

more than likely the ignition switch is bad.

Nov 20, 2009 | 1993 Jeep Grand Cherokee

1 Answer

Ignition lock problem

Try youtube they do not have a video specific for your car there are a few on ignition cylinder replacements may give you some support

Jul 20, 2009 | 1978 Dodge Magnum

1 Answer

02 VW Passat wagon ignition key wont turn

It must have been weather related. When it warmed up, the key worked and the steering column unlocked.

Apr 05, 2009 | 2002 Volkswagen Passat

1 Answer

Ignition key switch not working properly

Did you have the key to the on position? Then push the release.

Mar 20, 2009 | BMW 325 Cars & Trucks

Not finding what you are looking for?
1992 Acura Vigor Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acura Experts


Level 3 Expert

85222 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you an Acura Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides