My key wont turn when I put it in the ignition

If another key works look for a small difference between keys. Sometimes a key is cut high or low. If no key works in the ignition then it could be the tumbler.

change ignition

Solved.

The problem can only be one of three things. Steering column, ignition or key. When there is tension on the steering wheel it will prevent the key from turning. If the linkage in your ignition is bad it will prevent it from turning. If your key looks worn or marred (it doesn't always have to be bent) it wont turn.

Try this, put your foot on the brake, put the car in neutral, and try turning the key. If this works your ignition is going bad and needs replacing. IF it dosn't work it still needs replacing.

Try turning the steering wheel I know it is locked but try turning it and the key at the same time.

you might be able to reprogram the key, but you can only do this if you have two keys, what you need to do is put one key in the ignition turn the ignition on ( not over ) put the key that needs reprogramming into the drivers door and lock the vehicle with the key not the button, wait 10 seconds, remove the key, then press the unlock on the fobb, turn ignition off, remove key from ignition, put in the key that you just unlocked the car with and turn ignition do not turn over, turn off ignition,remove key wait 10 seconds, then put key back in then you should be able to turn it over as normal, if that does not work you will have to take key to be reprogramed at the main dealer...hope this helps

try wiggleling the key too the tumblers may be getting worn in the ignition is this works then replace the ignition

hello your ignition swicth is bad

HAVE IT CHANGED OUT