I need head bolt specs for a 1992 bmw 325 i - 1992 BMW 3 Series

I presume you want torque setting. If so here is



BMW 6 cylinder engine

According to my manual as follows:



cyl head to engine block

stage 1 30nm(22ft-lb)

stage 2 + 90 degrees

stage 3 + 90 degrees



cyl head to lower timing chain cover 10nm (89in - lb)



Loosening sequence is from oustside to inside crossover and tightning from inside to outside.

I presume you want torque setting. If so here is

BMW 6 cylinder engine
According to my manual as follows:

cyl head to engine block
stage 1 30nm(22ft-lb)
stage 2 + 90 degrees
stage 3 + 90 degrees

cyl head to lower timing chain cover 10nm (89in - lb)

Loosening sequence is from oustside to inside crossover and tightning from inside to outside.

I presume you want torque setting. If so here is



BMW 6 cylinder engine

According to my manual as follows:



cyl head to engine block

stage 1 30nm(22ft-lb)

stage 2 + 90 degrees

stage 3 + 90 degrees



cyl head to lower timing chain cover 10nm (89in - lb)



Loosening sequence is from oustside to inside crossover and tightning from inside to outside.

I presume you want torque setting. If so here is

BMW 6 cylinder engine
According to my manual as follows:

cyl head to engine block
stage 1 30nm(22ft-lb)
stage 2 + 90 degrees
stage 3 + 90 degrees

cyl head to lower timing chain cover 10nm (89in - lb)

Loosening sequence is from oustside to inside crossover and tightning from inside to outside.