Reprogramming VIN on EMC with Toyota Mongoose
You are gonna have to take it to toyota and have it flashed to your vin #
SOURCE: Why won't my horn work?
the horn is located behind the bumper, you will need a test light to
test for voltage at teh horn connections, if there is 12 volts at horn
connections, this means th horn is faulty.
if the horn is okay, check the horn relay - and if that is okay it could be the horn pad inside the car.
But it will most likely be the horn itself that is faulty.
Ask your local garage / mechanic if you are lost!!!
SOURCE: obd code p0440 for check engine light on 2000 Toyota Corolla
p0440 code means that the evap system has a leak. This could be caused by a bad or improperly installed gas cap. Either that or the purge solenoid has failed or the canister is plugged and not working properly.
SOURCE: 2005 Toyota Corolla CE P0741 error code.
This fix comes from the service manager of a Toyota dealer, he is a online expert named Toyota Ed.
Toyota is aware of this situation. Production changes have ocurred to correct this condition.
Here is what you do: Take your vehicle to your Toyota dealer. Tell them that you have a P-0741 code, and you want them to apply "Toyota Technical Service bulletin TC008-04" to your vehicle. They will perform several tests, and if you vehicle is lower than 5 years old, and less than 60, 000 miles, they will fix it for free. This TSB is covered by the Powertrain Warranty. Additionally, Thay may replace the ECU with an updated unit, and that particular warranty is in effect for 96 months or 80,000 miles.
This will definatly cure your issue
SOURCE: My 2007 Toyota Tundra 4.7l shows VSC OFF lights
check air filter for dirty , how many miles or kms have your car? , maybe need to replace spark plugs, try to reset the ecu for a momentany malfunction, remove the negative battery terminal few minutes and reconnect,start engine and drive, check if lights goes off , please write me
SOURCE: 2006 toyota corolla - I bought it used in
If the light was flashing when it came on, then it means your engine is misfiring.
A solid light can mean anything from a loose/faulty gas cap to a transmission issue.
This
light comes on when the computer detects a
fault of some sort in its diagnostic tests. If it keeps detecting this
issue, the light will remain on. If the light turns off, then it has
detected that the issue may no longer be present
In
order to find out what the exact reason was for your light, You need to
have your car computer scanned to retrieve the code that
the computer would have stored when the light triggered. Most garages
will do this free of charge. The code will tell you what may have
caused the light to initially turn on.
250 views
Usually answered in minutes!
×