SOURCE: BMW 320d 2005 Brake pad warning light reset
What it sounds like to me is that they didn't replace the "brake sensors" when they did the job. They are a seperate part and if whomever changed your brakes didn't charge you, I think like $20, for the part, then that's the problem.
SOURCE: brake warning light is on for 2002 bmw 745i.
The brake pads have sensors in them, when the pads get worn down to the sensor the light comes on letting you know its time to replace. this happens well before the pads are completely gone to reduce wear on the rotors. You should have the brakes replaced and the sensor also.
SOURCE: BMW 5 series - 2005 model - resetting service & waring lights
this needs to be done with a european capable scan tool,check around to see if someone has this tool, no other way sorry
SOURCE: asc light comes on and engine cuts out
When your ASC light is on this is to let you know your Automatic Stability Control system is switched off press the ASC button Till light is off /ASC is on this works with your rev limiter and should stabilized your idle. If the problem persists have your throttle control unit checked as thi can trigger the ASC light as well and may also activate the ABS light if not fixed
SOURCE: BMW warning lights: BRAKE, ABS and DSC
i need anyone one to help me with this problem, i have a BMW328ci and i tried tyo get out of my house this morning and all roads were frozen and the car started sliping and i activated the dcs button and car was still slipering and then brake, ABS, CBC & DSC lights turned on and i need to know how i can reset these lights so they can come off
209 views
Usually answered in minutes!
×