Stuck parking brake
On 88-93 models the brake goes to the rear calipers. First you should release the brake and look at the little arms the cable attaches on each caliper. If the cable is moving but the arms are not, you need to replace the caliper(s). More likely you will see the cable is not moving, in which case the cable(s) need to be replaced. Swapping in parts, or trying to free up and lubricate existing parts will depend upon your skill set, time, and budget.
That said, the parking brake adjuster works the same way as it does on most any other vehicle with a drum brake setup.
The parking bake adjuster works only when backing up. Sound like your may be getting stuck. The "hop" you feel may just be when the obstruction comes free/loose and fully release the emergency/parking brake
When it comes to poor parking brake operation, check for contaminated or excessively worn parking brake shoes.
I am surprise the dealer did not suggest this as a possible cause. Go back to dealer or find a reputable brake shop to check this out. Both rear wheels and rotors should be removed and the parking brakes inspected. This is a lot easier and cheaper fix than it will be if the problem is in the transmission (which it could be).
Please post a comment when you find out the true cause if this or something else so I can add this to my knowledge base. J
Thanks for using FixYa - a 4 THUMBS rating and POSITIVE TESTIMONIAL is really appreciated for the FREE answering of your question.
176 views
Usually answered in minutes!
×