Question about 1995 Mazda MPV
I rectified the engine in my mazda mpv, but upon reaching a certain speed the engine cuts out and does not accelerate, changed the TPS, but not resolved, if the tps is off it accelerates more slowly, but reaches the rotation. thanks for the help.
You will have both a throttle position sensor and a peddle position sensor both fitted to your throttle ,the cars ECU must pick up both sensors so it is not doing so you may need to change the throttle body.as you can not just change the sensors on there own.
Posted on Jan 11, 2015
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: mazda mpv 2005 vacum leak
99% of the time it's a pcv hose, put your hand behind the intake manifold while the car is running and you should be able to feel it. it will be sucked in at the elbow on the manifold, this is not an easy hose to replace.
Posted on Dec 18, 2008
I can almost guarantee its the ignition coils. Its common with the 2004 mazda mpv. They are very expensive but I just changed my #3 coil and boy im I glad I did that. With the Mazada mpv 2004 hopefully a check engine light will come on so you can see which ignition coil it is. Once you find out change it and the spark plug that goes under it. If its one of the back ignition coils its gonna be expensive or time comsuming. I would change all three coils in the back and all three Spark plugs so that you dont have to worry about them again since you have to open the manifold just to get to them. I recomend taking it to a auto shop that you trust. While your back their you can change the pvc valve and bromet I think its called (the cushion for the pvc valve). Its all in the same area. The ignition coil could run from about 45 dollars each to about 65 depending on where you go. One more thing, if the check engine light comes on you have to check it quick because it cancells it self out if the ignition coild is not that bad yet. the sometimes it stalls and sometimes it doesnt syndrome. you take it to the shop and it doesnt happen again until your home thing lol. Thats just the beggining of it going bad.
After I changed my Iginition coil and all three spark plugs in the back of the engine the car runs like a race horce. no more stalling. im very happy I did that. It cost me about 125 for the coil and the three spark plugs and a new thermometer for another issue. and about 200 bucks to put them in, I think I got a good deal considering most dealers in nyc charge 100 bucks an hour to work on your car. Its not that big a deal of the work. You just have to know what your doing. It took him about 5 hours to complete the job. I hope this was helpful.
Posted on Mar 27, 2009
one thing to check is rear engine mounting i have had a stone wedged in one and it causes a nasty noise when accelerating
Posted on Apr 17, 2009
Tips for a great answer:
Jul 28, 2014 | 2000 Mazda MPV
Apr 18, 2014 | 2006 Mazda MPV
Mar 27, 2014 | 1995 Mazda MPV
Apr 20, 2009 | Mazda B2200 Cars & Trucks
Feb 14, 2014 | 1995 Mazda MPV
128 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: