At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
There is only one fuse that mentions 'Locking', but also refers to the General Electrical Module (GEM). If you change the fob battery, you need to reprogram it to the vehicle. Or you could open any Transit around you. Lots of help below including resetting..
The P0141 means O2 Sensor Heater Circuit (Bank 1 Sensor 2) The P0121 means Throttle/Pedal Position Sensor/Switch A Circuit Range/Performance Problem The P0200 means Injector Circuit The P0308 means Cylinder 8 Misfire Detected
P0200 is injector fault code. You need to test each injector with a ohm meter. The resistance should be around 10oms if 0 then it's falty ijectors, if not maybe it's cars comp. Does the security light flash after thrying to start the car?
Coolant Temperature Sender TESTING a coolant temperature sensor:
Using an ohmmeter, measure the resistance between the terminals. Refer to the appropriate chart for your engine. If the resistance is not as specified, replace the sender.
Fig. 1: Coolant temperature sender chart — gasoline engines
Fig. 2: Coolant temperature sensor chart — deisel engines
Fig. 3: Inspecting the coolant temperature sender for resistance
no power to injecters
×