Need to replace the surpentine belt

support the right side of the motor. remove the right side engine mount (5-7 bolts) using a socket wrench or serpentine belt wrench take tention off the tensioner while keeping tension off the tensioner remove the belt. NOTE: take notice of how the belt is routed.

to install reverse remove steps

On the 4cly 2.2 engine you DO NOT need to remove the engine mount. If you remove the right front wheel, there is an access panel held in place by plastic push pins. If you remove this panel, it is very easy to remove the belt by attaching a serpentine belt removal tool to the 3/8" drive hole in the tensioner arm.

most belt dia are under hood,,,if not,,most auto places will give u a print out when u buy the belt,,all goodyear belts give u a dia on the back of the belt jacket,,,hope it helped

hi. the belt route map is usually on a sticker under the hood. It is also in the owner manual. Finally, NAPA stores have a data base of them and will gladly print one off for you. J.

how do I loosen tension for serpentine belt

Sounds like your serpentine belt. I would check the condition of your belt on the engine. It is possible that you could also have power steering pump issues. Check belt condition first, Second if the belt is not glazed and looks ok remove the belt and check movement on power steering pump pulley to see what what type of resistence is presen while turning pulley. If so, pump should be replaced. This could be causing belt to slip and make the squeeling that you are hearing. If no resistence on pump replace belt and varify repair. Good luck.....

the serpentine belt should have its own tension-er that's already there and how you get it off with a 1/2 or 3/4 ratchet

how to replace alternator on 2003 saturn vue 3.0 v6

how do i install serpentine belt

The diagram to install the belt is under the hood near the engine emissions sticker, if not there near the belt.