- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Steering Wheel Adjustment .The lever is located under the steering column, slightly to the left. To adjust the steering wheel: 1. Pull the lever down. 2. Move the steering wheel up or down into a comfortable position. 3. Pull the lever up to lock the wheel in place. Do not adjust the tilt lever while driving.
? 2:15
https://www.youtube.com/watch?v=NP8YmnGRXWU
Jan 4, 2012 - Uploaded by AutoTech USA
If your power steering wheel is no longer working; moving up and down, back and forth, and when you attempt ...
Look on ebay for an REC Joystick replacement. In the mean time you can hold down the middle button on the right side of the back of the steering wheel, where you can control the radio features. When you hold this button down, a little red wheel symbol appears on the navigation screen which means you can control the navigation system from the steering wheel controls. This works for simple tasks until you get the replacement joystick. They are about $30 and take about an hour to install.
Check both front wheels with the steering wheel centered. One or both may appear to be pointing in the wrong direction slightly. Check both sleeves on the tie rod ends to make sure they are tight and not able to turn. (adjustment sleeves are slightly different than on most cars. One sleeve extends from the drivers side across the front and is about 21/2' long the other is shorter and is about 5" to the passenger side of the pitman arm on the steering box. If either moves, turn it 'till the wheels are fairly straight, tighten the bolts that are on the clamp around the slotted tube, and bring it to an alignment shop and have the toe in re-set. A condition such as this is nothing to mess with. loss of steering is extremely dangerous.
Open the gear motor on the left hand side of the telelscopic assembly. Take the plate off held by 4 philips screws. Using a 10mm socket, remove the bolt holding the platic gear. Remove plastic gear and insert the reverse way. Over the years, one side of the gears get worn out.
×