Its when i take out the key and lock the doors that the headlights come on

SOURCE: 2002 oldmobile bravada ignition key is stuck in lock position

try and turn your steering wheel a little bit left or right and and the same time try and turn the key when it turns toward the dash then try and turn the key back. try and repeat this several times if neccessary. this should work. please rate this solution. thanks

SOURCE: 1993 Oldsmobile Cutlass Ciera won't turn over (crank)

First step is see the Condition of the oil.
Them you need to see if the ENGINE is NOT LOCKED UP.
To Do that, you will need a Rachet and Socket to Try TURN the CRANKSHAFT pulley by Hand.
If you are ABLE to Rotate,
And the Battery is good, Check all the Connection from the BATTERY to the STarter motor,
And the Ground Cable. From battery To the Chassis and the Bolt at the Transmission.

But if you are Unable to TURN over the Crankshaft Pulley.
The Engine is Locked up.
And will need to take a Opinion of a Mechanic .
To be sure Of the problem and the condition that may affect to the ENGINE went damaged.

I hope this help on your problem.

Thank you for use fixya...

SOURCE: how to get key out that is stuck in ignition

Remove steering column shroud(cover)and tap ignition barrel with small hammer while twisting key backwards and forwards,also turn steering wheel backwards and forwards sometimes this is enough to release key as the locking pins in barrel and the steering lock pin do sometimes jam.You will have to remove steering column shroud to replace ignition barrel if tapping/hitting it doesnt work anyway so its not a wasted effort.Good luck,let me know how it works out

michael

• 122 Answers
• Posted on May 10, 2009

SOURCE: key wont turn in ignition

try wiggleling the key too the tumblers may be getting worn in the ignition is this works then replace the ignition

SOURCE: i locked my key in my cutlass cierra "94 how do i get into my car

locksmith is needed to open your door with a slim jim