SOURCE: I have a 2001 Honda Accord EX 4Cyl manual
If your MIL (Malfunction Indicator Light) stay on, some fault code is stored in the PCM (Powertrain Control Module) and you will need scanned this device to know exactly which coode is stored there. With this code number could send additional details.
Its possible that you have a speed sensor or wire connection issue.
Keep us updated.
SOURCE: Check Transmission and Cruise Set light come on
Have the vehicle scanned for diagnostic trouble codes to see if any have set due to a malfunction.Either a scan tool,or a code reader can access your vehicle's computers.If there is a diagnostic trouble code present,places like All Data online have the diagnostic routes for each trouble code.The diagnostic route,performed properly,will lead to the conclusion of what is malfunctioning.
SOURCE: On my 2001 Honda Passport when I hit a bump the
First thing to do is check the trans fluid level. If it is too low, going over bumps or up a hill could cause fluid starvation.
SOURCE: 2001 rodeo 3.2 trans check
Sounds like a loose wire, switch or connector somewhere or a bare wires touching. Have someone sit in the vehicle to watch for the light while you go through all the accessible wires etc to try duplicate the fault. Once duplicated the necessary remedy can be implemented
347 views
Usually answered in minutes!
×