I moved my passenger seat all the way forward to vacuum behind it. It still reclines, tilts and move up and down, but only clicks when I try to slide it back and forth. There is a black plug with 4 wires not plugged in to anything, and I can't see a place for it. Any ideas?
That is the seat heater plug most likely and you car is not equipped with that accessory. All cars come with the same wiring. Does the power seat switch have 12 volts present?
SOURCE: electric seat is seized
Hi hollandhouse,
The seat has to be removed, to carry out any repairs.
All the best Johngee10
SOURCE: a4 convertible drivers seat.
I have had the exact same problem , the actaual cause of the seat not sliding back is due to the small cable retaing clip which fastens at the underneath of the seat this is a very common problem and is very trickY to get to as you say the rear panel appers to need to come off , it does not, you axs the small clip from removeing the liners at the very bottom of the seat where there is a footwell light , when you axs this area you be able to get to the clip or the actaul cable ,to which ever is broken,,
SOURCE: water on floor behind front passenger seat
drill a hole through the floor as a quick fix ,if it gets in let it out ,then check for the leak ,try under the firewall where the AC drain pipe is ,it could be the same pipe for drain water coming in from air intake vents
242 views
Usually answered in minutes!
×