2007 Mercedes-Benz ML320 CDI Logo

Related Topics:

a
adolfo Posted on Dec 01, 2017
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Changing headlights on my ml320.aftermarkets did not come with the two grommet like things that are on the bottom two bolts that hiold and go aroung screws. any =one know how to get these thing off the old so i can put on the new .they look like they are two parts but also look like they were locked in and sealed?thanks

Answer This Question
  • adolfo
    adolfo Mar 13, 2014

    original headlights have two grommet live plugs or adjusters on them .they are where the two bottom bolts go.they are about a inch thick my new ones dont have this soicant bolt them on.i cant get them off originals to put on the new. they look like they were machined on . but i think they come in two pieces. coz the way the news have a divider in the hole./checked thru internet and cant find anyone whosells this or the name?thanks

×

1 Answer

ivan whisker

ivan whisker

Level 3:

An expert who has achieved level 3 by getting 1000 points
All-Star:

An expert that got 10 achievements.
MVP:

An expert that got 5 achievements.
Genius:

An expert who has answered 1,000 questions.

  • Mercedes-Benz Master 1,164 Answers
  • Posted on Dec 02, 2017
ivan whisker
Mercedes-Benz Master
Level 3:

An expert who has achieved level 3 by getting 1000 points
All-Star:

An expert that got 10 achievements.
MVP:

An expert that got 5 achievements.
Genius:

An expert who has answered 1,000 questions.

Joined: Jul 24, 2012
Answers
1164
Questions
9
Helped
302610
Points
2628

Not surevwhat you mean but if there plastic just cut them off

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

2003 Chevy tracker 2.0 in4 dohc valve cover gasket
With the rubber gasket , you shouldn't need to add any gasket sealant to hold it on. Make sure that the track for it on the valve cover and the surface it sits on, on top of the head are clean.

It is best to replace the grommets on that valve cover by putting them on the bolt first then into the valve cover. This model tends to have issue breaking/tearing the grommets. There should also be grommets for other things like the filler tube and breather tube.

As far as I have ever encountered, I know there is an order to put the bolts back in. I've never use a specific order myself. Most importantly in this model the bolts should be re-installed to 106 INCH pounds. Make sure the torque wrench is on INCH pounds not foot pounds.
Read full answer
Mar 25, 2022 • Cars & Trucks
0helpful
1answer

How to change headlight bulb on 2009 smartcar fortwo
first you should what is your car bulb type, such as HID Xenon Light H4 bulb. And open you hood, there is a rubber grommet the size of a coaster thats where the bulb is located. unplug the plug (squeeze the side of the plug and it should slide right off)
remove the grommet. just pull if off away from the headlight.
the bulb is secured by a spring clip push the clip towards the front of the car and move it to one side to get it unhooked from the headlight housing.
pull the head light bulb out. replace with new head light bulb (MAKE SURE NOT TO TOUCH THE GLASS OF THE NEW BULB)
secure the bulb with the spring clip.
put rubber grommet back on
plug the harness back on the bulb.
your done
Read full answer
Oct 30, 2012 • Smart Cars & Trucks
0helpful
1answer

How to change a headlight
-open hood
-locate 4 retaining nuts and bolts
-undo nuts
-open wiring harness quick connect (push tab and pull apart)
-remove old headlight
-install new headlight into correct position
-connect new headlight to wiring harness
-attach 4 retaining screws
-turn on headlights against garage door
-tighten top and bottom bolts until desired height setting for lights
Read full answer
Jun 24, 2011 • 2003 GMC Yukon XL
1helpful
1answer

I cannot seem to locate how to get into the area for changing the bulb. I see 4 clips on the headlight am I supposed to unclip the headlight and pull the entire headlight assembly out to change the bulb/
Typically the entire assembly unscrews with 3 or 4 bolts (non adjustment bolts), then the whole thing somes out and you can get at the bulb.
Read full answer
Feb 17, 2011 • GMC Envoy XL Cars & Trucks
0helpful
1answer

How do i get the fan off the water punp,on a ml320 2001 meredes benz
Here's the trick: use a long screwdriver between the shaft and a bolt or between 2 of the bolts to hold the fan while you loosen another bolt with a wrench. Don't remove any bolts until they are all loose. Keep using your screwdriver on other bolts to hold the fan until you have them all loose. Does this make sense?
Read full answer
Sep 27, 2010 • 2007 Mercedes-Benz ML320 CDI
1helpful
1answer

How do you access the washer pump to change it on a 2003 a4 saloon
The pumps(windshield and headlights) are attached to the washer fluid reservoir. That is located behind the inner fender well on the drivers side I think(that's where it is on my 2000 S4). About 10 Torx screws for the inner well, two twist fasteners on the bottom to the lower air dam. Then a few 10mm bolts to remove the reservoir. The upper pump is for the headlight and the bottom is the windsheild. They just pop in/out through a rubber grommet. About $50 each. Keep antifreeze in the fluid or you will but they every year.
Read full answer
Feb 06, 2010 • 2004 Audi A4
0helpful
2answers

Headlight replacement
On that car its pretty easy you can get a manual at any auto parts store for $15 and it will tell you step by step....as well as many other things that will help you down the road.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/sean_54c3a3dc48a7773c

Read full answer
Nov 13, 2009 • 2005 Acura RSX
1helpful
2answers

1999 Jimmy with Envoy package. Driver side low beam is burned out. Replacement from GM is $1200.00. Can I use an after market system? If so, how do I locate and remove existing HID ballast?
1999 GMC Envoy w/ same problem - we removed the bumper then had easy access to the ballast (two bolts on top and one on the bottom if I remember correctly). For the bumper, there are two bolts visible on top, then two a bit lower just inside. Remove the 4 bolts then you pull the bumper forward to unlatch and remove it. When you put the bumper back on, insert the lower bolts first - otherwise it\'s a pain to get them back in correctly. For a temp fix we removed the ignigtor/bulb and ballast, took the wires going into the ballast (regular bulb wires) and connected a 9006 bulb. We removed the retainer from the ignigtor to hold the new bulb into place, it took some adjusting to get it set in place but it worked nicely. We will be putting new/aftermarket headlight assemblies in soon, but this fix only cost $25; it was a quick solution that took about 2 hours.
Read full answer
Sep 24, 2009 • 1999 GMC Jimmy
2helpful
1answer

Ford Windstar - Codes PO171 & PO174
Problem is most likely the gaskets and isolator bolts between upper and lower intake manifolds.
Look at the rubber grommets on the bolts that bolt the upper intake to the lower. If they rubber grommets are black then this is most likely the concern. They have a new style gasket and bolts for this and the ford part number are XF2Z-9H486-AA for the gaskets and 3F2Z-9S479-AA for bolts (1 pack of 8 bolts).
Read full answer
Feb 05, 2009 • 2001 Ford Windstar
0helpful
1answer

Changing headlight on driver's side
there is a 3rd bolt at the bottom of the lens assembely it is hidden under that open tube looking thing pull up on the tube and u will c the 10 mm bolt
Read full answer
Oct 19, 2008 • Hyundai Motor 2003 Elantra
Not finding what you are looking for?

View Most Popular

2007 ML320 CDI

  • Cars & Trucks

Related Question

2003 Chevy tracker 2.0 in4 dohc valve cover gasket

  • Cars & Trucks

Related Topics

61 views

Ask a Question

Usually answered in minutes!

Popular Questions

Resetting Radio with WAIT on an 01' Ml 320

2007 Mercedes-Benz ML320 CDI

Mercedes key fob wont lock the doors.might have a

2007 Mercedes-Benz ML320 CDI

How to reset srs light

2007 Mercedes-Benz ML320 CDI

Fuse box chart for ml 320 cdi

2007 Mercedes-Benz ML320 CDI

Brake lights stay on

2007 Mercedes-Benz ML320 CDI

Check Out the Latest Top Trucks Report!
Check Out the Latest Top Trucks Report!

View all Fixya Reports

Top Mercedes-Benz Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

PDF Manual
. 2007 ML320 CDI Manual

2007 ML320 CDI

Loading...