Reset service engine light - 2000 GMC Sierra

Service engine soon light is on indicating a problem with your engine. Take it to somewhere like Autozone (it is free to check code) to see what the code and problem is, then fix the problem or the light would just keep coming on every time till it is fixed.. You can use a scanner to read and reset the light, code.

About 10,800 results (0.85 seconds) Search Results

DIY: Reset Check Engine Light without OBDII reader ...

? 3:31
https://www.youtube.com/watch?v=TvBcdjLkBhU
Jul 1, 2014 - Uploaded by Christian Macias
Learn how to reset your Check Engine Light (CEL) withoutusing an OBD II 2 scanner / reader tool. Will work on just about... Also referred to as Service Engine Soon, and Malfunction Indicator Light (MIL). This is very general ...Missing: l200

Service Wrench Light - YouTube

? 1:34
https://www.youtube.com/watch?v=S8pvlJNUkW8
Feb 17, 2009 - Uploaded by richpin06a
... reset sequence; this was the reason for the two indicator lights..... My 2002 Saturn LW300 V6 has this light come on after driving 40 KM (25 ... My service engine soon light is on, on my saturns series (2001) how would i check mine?.. i dont have the scan tool, but i did hear of using a paper clip before.

How to Reset the service engine light on a Saturn S-Series ...

vehicle-maintenance.wonderhowto.com/.../reset-service-engine-light-satu...
Apr 30, 2010 - It is never a good sign when the 'check engine' light comes up on your

Reset oil service light Honda Pilot. From years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012.
How do you reset oil service light Honda Pilot. From years: 2003, 2004, 2005.

1. Turn off the engine. Press and hold the SELECT/RESET button in the instrument panel and turn the ignition switch to run (one position before starting).
2. Hold the button for at least 10 seconds, until the indicator resets.
3. Turn the ignition off and then start the engine to verify the indicator has been reset.

How to reset oil service light Honda Pilot. From years: 2006, 2007, 2008, 2009, 2010, 2011, 2012.
Resetting the Engine Oil Life Display if maintenance service is done by someone other than your dealer, reset the maintenance minder as
follows:

1. Turn the ignition switch to the ON (II) position.
2. Press the select/reset knob repeatedly until the engine oil life is displayed.
3. Press the select/reset knob for about 10 seconds. The engine oil life and the maintenance item code(s) will blink.
4. Press the select/reset knob for another 5 seconds. The maintenance item code(s) will disappear, and the engine oil life will reset to 100.

All information is taken from the Honda Pilot owners manual.

Hello. There are only two ways to reset the service engine light:
1. Have your car's computer scanned and ask the tech. to reset the system. [AAMCO repair shops and some auto parts stores do this for free].
2. Disconnect the battery for two full minutes.

Hold down the "trip" and "trip reset" buttons at the same time when the service engine light comes on. The service engine light comes on between 5000 and 8000 miles as an oil change reminder, however you have to reset it manually.

Is it the "oil change req." light? Your owners manual will have the process for reseting the oil change light.
If it is "service engine soon" light, the vehicle will need to be scanned with a professional scanner.

The service light has nothing to do with the engine light. It can't be trigged by the ECM.
The service light are only trigged by one of 3 counters (time since last service, engine hours or mileage).

The service light are easy to reset if you got a YM1999-2000 car.
1. Put the ignition on to pos.1 and press down the trip reset button on the instrument cluster and keep it depressed.
2. Put the ignition on to pos.2,
3. When the service light starts to flash then release the trip reset button. Now you have reset the service reminder lamp.

You need to read out the DTC's from ECM to be able to fix the check engine light.

If you bring it back to the mechanic who last serviced it he will gladly reset it free of charge.

first be sure that its the engine light and not the "service" light. the service light will usually illuminate if its time for an oil change. if its the service light ur owners manual should tell u how to reset it. if its ur engine light then try disconnecting ur positive battery cable for 1 minute. that should reset ur ecm and get rid of the engine light. if the engine light comes back on then have a diagnostic scan done to determine whats causing it. LJ

HI
without using the scan tool you can do it by disconnected the the battery for ( 24 h) to reset it or to ( 5 m) to reset the service engine light but the fault sty in the memory

WITH MY BEST WISHES