Just replaced the wiring harness on my 1988 mazda rx7 and now the car will not start. the key was lost and when the car had to be moved something in the steering column had to be broken in order to move the car. this piece was replaced, now the car will not start unless you spry starting fluid into it. help please!! I do have the key now..
Try this link out. 1988 mazda rx7 will not start Google Search
SOURCE: 2001 Mazda tribute key does not start the car
??start??have you put the chip out of the old key into the new key??
SOURCE: 1988 mazda rx7 turbo
make sure you tune it up well and take your time with it you can all so add a bit of ATF in to the spark plug hole. it help lube yes it going to smoke be it ok.i work on them for a for a living from stock rebuild to full racing.
SOURCE: recommended oil for a 1988 mazda rx7
are you sure you want to start using it. Yes it is a great product but it wont bring an old engine, magically, back to life. If anything it is thin like moble-1. So on an old engine it could start to leak oil from the main seals and/or start to smoke from worn rings. and royal purple is a full synthetic. Don't mix it with conventional oil.
SOURCE: I just replaced the wiring harness on a 1988 mazda
you need the original black plastic key that came with the car lock all doors and make sure anything that opens is closed. then unlock the car on the driver door with the key. If you lost the key look in the owners manual hopefully the code on the key is written in there and then go get a new key made at a mazda dealer. Hopefully this helps. Maybe you can help me i need to replace my wiring harness and i dont know where the clear 4 prong plug is located under the dash on the main harness. i already unplugged the two orange ones and the two from the computer i just cant find the lear 4 prong one.
132 views
Usually answered in minutes!
But your fuel pump is working correct
×