2002 Ford F250 Super Duty SuperCab Logo
Posted on Jun 12, 2009
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

02 Ford F350 Crew cab passenger side door locks get tired.

The passenger side locks don't fully function either direction buy using the door mounted button or key fob. The key works great. But if I park my truck and lock the doors that side doesn't allways lock. (I have been told these are electric but I don't know if thats right because the problem is less when I do some driving. I'm wondering if this is a vacuum system?

Answer This Question

1 Answer

Anonymous

Level 3:

An expert who has achieved level 3 by getting 1000 points
All-Star:

An expert that got 10 achievements.
MVP:

An expert that got 5 achievements.
Vice President:

An expert whose answer got voted for 100 times.

  • Master 314 Answers
  • Posted on Jun 12, 2009
Anonymous
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points
All-Star:

An expert that got 10 achievements.
MVP:

An expert that got 5 achievements.
Vice President:

An expert whose answer got voted for 100 times.

Joined: Jun 09, 2009
Answers
314
Questions
1
Helped
138545
Points
1069

There are no locks that are operated by vacuum. Whoever told you that the locks are operated electrically was correct. When you are driving the alternator is spinning allowing for more electricity to flo through the vehicle. this could allow more to flow to the lock cylinders.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

1997 Ford F-350 Crankshaft Position Sensor located
If its a powerstoke the sensor is on the front of the engine just above the harmonic balancer on the right side (passenger side)
Read full answer
May 15, 2012 • 1997 Ford F350 Crew Cab
0helpful
1answer

I have a 2002 f350 superduty 4x4 crew cab with an automatic trans. Where is the transmission range sensor located?
It's on the side of the transmission. drivers side. Once you get under the truck you will see the shift cable going to the transmission. the range sensor is mounted on the transmission under the cable arm. easy to replace.
Read full answer
Feb 06, 2011 • 2002 Ford F350 Super Duty DRW Reg. Cab
0helpful
1answer

I need to locate the emergency fuel shut off switch on my 1989 ford f350 jamboree motorhome
Try looking under the passenger side carpet up towards the firewall or kick panel
Read full answer
Aug 20, 2010 • 1997 Ford F350 Crew Cab
0helpful
2answers

I have a 2001 Ford F350 with a crew cab. All my windows will roll down ( with the driver's door switches ) but won't roll up except the driver's window. Now my driver's window will not roll up. Do I need...
pull the driver side door panel off and check if the wiring harness has come unplugged or loose
Read full answer
Jul 24, 2010 • 2001 Ford F350 Super Duty SuperCab
0helpful
1answer

Door adjustment for a 96 f350 dropped about 1/2"
Here's the solution: You might want to park it under a tree and tie a rope to the door to pull it up when loosened.
ADJUSTMENT Fig. 1: Door hinge adjustment 84920001.gif
Fig. 2: Rear door hinge adjustment, F-350 Crew Cab 84920002.gif
NOTE: Loosen the hinge-to-door bolts for lateral adjustment only. Loosen the hinge-to-body bolts for both lateral and vertical adjustment.
  1. Determine which hinge bolts are to be loosened and back them out just enough to allow movement.
  2. To move the door safely, use a padded prybar. When the door is in the proper position, tighten the bolts to 19–25 ft. lbs. (25.5–34.5 Nm) and check the door operation. There should be no binding or interference when the door is closed and opened.
  3. Door closing adjustment can also be affected by the position of the lock striker plate. Loosen the striker plate bolts and move the striker plate just enough to permit proper closing and locking of the door.
prev.gif next.gif
Read full answer
Jul 13, 2010 • 1997 Ford F350 Crew Cab
0helpful
1answer

NEED TO LOCATE THE INERTIA SWITCH ON A 1997 F350 7.3L CREW CAB .MY MANUAL SAYS ITS ON THE FRONT PASSENGER SIDE COWL(BEHIND THE TRIM)BELOW THE INSTRUMENT PANEL.I HAVE TORN APART MY WHOLE DASH AND FRONT TRIM...
my Ford manual says the same thing...

"Behind the right Kick panel"

you should not have to remove anything to get to this and there should be a cutout in the trim panel where the switch is located

could it be someone removed it?
also check the drivers kick panel
Read full answer
Apr 11, 2010 • 1997 Ford F350 Crew Cab
0helpful
1answer

I have a 97' F-350 Crew Cab. When I have the brakes on rear brake lights work. but some time when I turn the right signal on the left light quits working
you need to replace the multi-function switch (directional switch) easy to do they cost about $60
Read full answer
Nov 07, 2009 • 1996 Ford F350 Crew Cab
1helpful
1answer

Ford F350 Crew Cab Power Window Problem
Did you check for power at the switches. Are you sure the fuses are ok. Sometimes the wires break because of opening the door. You will have to inspect the harness and maybe have to remove the door panel. Most likely its a driver door wiring issue or the fuse.
Read full answer
Aug 05, 2009 • 1997 Ford F350 Crew Cab
0helpful
1answer

I have a 97 F350 7.3L Diesel and trying to locate MAP sensor
on the passenger side firewall next to the air box and blower motor.
Read full answer
Jul 22, 2009 • 1997 Ford F350 Crew Cab
0helpful
1answer

How to replace actuator on F350 V0
My right sliding door's lock doesn't function either. I took off the door panel and found that the lock mechanism was broken. Normally I would think this strange, as the lock mech is metal. But since this is a Plymouth product, I some how think it should be normal for something to break off without it ever getting a direct hit. I can only assume that my kids closing the door too hard might have had something to do with this. Anyway, the whole lock mech needs to be replaced, and I haven't even tried to see how much that will cost me. This Van has cost twice in repairs than what I paid new for it. (just kidding, but it sure feels like it). If you have an answer to this query
Read full answer
Jul 03, 2008 • 2003 Ford F350 Super Duty DRW SuperCab
Not finding what you are looking for?

View Most Popular

2002 F250 Super Duty SuperCab

  • Cars & Trucks

Related Question

1997 Ford F-350 Crankshaft Position Sensor located

  • 1997 Ford F350 Crew Cab

Related Topics

432 views

Ask a Question

Usually answered in minutes!

Popular Questions

Fuse box diagram

2002 Ford F250 Super Duty SuperCab

I need a fuse panel

Ford F-250 Cars & Trucks

Fuel relay on a 2002 f250 super duty, no manual

2002 Ford F250 Super Duty SuperCab

F-250 extended cab rear door will not open.

2000 Ford F250 Super Duty Crew Cabs

Where is the turn signal flasher relay located on

2001 Ford F250 Super Duty Super Cab

Check Out the Latest Top Trucks Report!
Check Out the Latest Top Trucks Report!

View all Fixya Reports

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...