Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

1993 Plymouth Sundance will not start or turn over?

1 Answer

Anonymous

Expert 104 Answers
Posted on Jun 12, 2009

Anonymous

Expert

Joined: Jun 12, 2008

Answers

104

Questions

Helped

49153

Points

261

Make sure battery is fully charged. Connect a test light to battery ground and touch batt+ to check if light. Now test that there is power to the starter heavy wire directly connected to the starter. If power, good. Now test for cranking power to solenoid wire which is on top of starter; have someone cranks as you check for power. If there is power, starter could be acting up. If not, check all fuses and neutral switch. Be careful working around moving and hot parts.

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

0helpful

1answer

Transmission is leaking 1993 Plymouth sundance

They all do. Get a new gasket and use black RTV on both sides of it.

If you mean from the axle seals then it's done, the differential bearings were terrible in those.

Read full answer

Oct 06, 2014 • 1993 Plymouth Sundance

0helpful

1answer

1993 plymouth sundance transaxle vibrations when starting out at every stop. When ever I start out in drive, whether I just started the car or at a stop sign, there is a noticeable vibration. Then it goes...

mine does the same i did some searching an foud it could be te front pump on the trans from a worn barring est cost. 695$

Read full answer

Nov 01, 2010 • 1993 Plymouth Sundance

0helpful

1answer

How do ichange the belts in my 1993 plymouth sundance is there a tension to loosen

Actually yes, there is a tension pulley that is spring loaded. You have to put a wrench on it and release the tension to change the main belt. The belt for the Alternator has an adjustment that is loosened and tighten with a socket. This one is usually located on the Alternator bracket.

Read full answer

Jul 21, 2010 • 1993 Plymouth Sundance

2helpful

1answer

1993 Plymouth Sundance 2.2L cranks, no start

When you turn the ignition on the pump is energized for 2 to 3 seconds. did you check it like that. it is also energized when cranking the engine. there is a fuse then a relay then the fuel pump. the relay is ran/ energized by the ecm computer. if there is a fuse relay box under the hood you'll need to check there to. good luck

Read full answer

Jun 17, 2010 • 1993 Plymouth Sundance

1helpful

1answer

How to set the timmng on a 2.2 liter or a2.4 both r 4 cycsend video of it how the dot line up

Click on the following free direct Link. It has several Diagrams including the correct Timing Belt Diagram for your 1993 Plymouth Sundance 2.2L SOHC In-Line 4-Cylinder. Included are Instructional and Directional Diagrams.

http://www.2carpros.com/car_repair_information/year/1993/make/plymouth/model/sundance/1993_plymouth_sundance_timing_belt_diagram_marks.htm

Let me know if this helped, or if you have additional information questions. Feel Free to contact me at FixYa.com!

Read full answer

Apr 06, 2010 • 1993 Plymouth Sundance

3helpful

1answer

I need a shop manual for a 1993 plymouth sundance duster. Where can I get one?

If you visit the autozone.com website and register your car information, it will give you access to an online repair manual for the car. It is a really handy resource for automotive maintenance that I think you will find helpful. It's free of charge. Hope this helped and best wishes.

Read full answer

Oct 07, 2009 • 1993 Plymouth Sundance

0helpful

1answer

1993 plymouth sundance will turn over but will not start. was driving but it died. sound like it is not getting gas

Hi I am vortash to check if the cylinders are getting fuel just turn the vehicles engine few times then remove a spark plug to see it it is wet if it is not a fuel problem more likely spark failure replace plugs as they can fail under pressure and check for spark ,, may als be a head gasket problem so check compression and see if above 140 0r in the green with each cylinder . hope this helps regards vortash

Read full answer

Jun 30, 2009 • 1993 Plymouth Sundance

0helpful

1answer