Question about 1988 Toyota Corolla 4 Door

Open Question

What are the tappet clearance settings for Toyota 2E engine?

Posted by on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 8 Answers

SOURCE: Toyota 1jz engine,are they hydraulic or shim

Shims and Valve clearance cold : 0.15-0.25mm (in)
0.25 0.35mm (ex)

Posted on Aug 19, 2009

Ad
Benimur

Louie Role

  • 6966 Answers

SOURCE: toyota 2e engine

Hi,

The only positive way to check if the oil pump is working and therefore there is correct oil pressure is to temporary install a non-electrical oil pressure gauge that uses a small copper tubing to sample the oil/pressure and drive a needle on the gauge. Depending on temperature, idle should register about 20+psi. Having done this and confirmed that indeed there is sufficient oil pressure then it may simply be a defective oil sending unit. Otherwise, no or low oil pressure at idle is an indicator that the engine needs to be opened up again.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Thank you for using FixYa.


Posted on Jul 24, 2008

Anonymous

  • 1 Answer

SOURCE: what are the tappet clearance settings for the

any 1 know the tapit setting for a toyota starlet 1990

Posted on Feb 17, 2010

Anonymous

  • 2 Answers

SOURCE: 1986 toyota corolla 2E engine high fuel consumption

why does my normal rpm always bug down when the engine start?and when I started to use the air con, the rpm was playing. It doesnt go on a certain point. it always range at 800rpm then it will down to 700. what am I might do to solve this probem?

Posted on Mar 13, 2010

syasyz694

  • 1 Answer

SOURCE: what are the valve clearances

I have Toyota Corolla EE80 2E engine with 12 valves. I recently top overhaul but the engine is not running in perfect condition. The engine rpm goes up and down (engine shaky). I set the rpm around 1200, if i set it lower than that the engine will stop. I check the engine timing with both the cam and crank on the correct mark. Sounds like the carburetor failure but i had service it but still the same. If i turn the distributor to the right (******) the engine rpm drop, than i turn it to the left (advance) but the rpm drop too, as i know the engine rpm should raise high and could hear the pinking sound from the valves if the the engine accelerate. For your info, i bought the cylinder head from someone who previously general overhaul his engine about 6 months ago. He dismantle his engine because of con rod problem. I just fix the cylinder head to my engine without grinding and adjusting the valves because it had been grind and adjusted 6 months ago. I check the spark plugs but look all black. I pull the plug cable one by one during the running it sounds all ok. Now i wonder what is actually wrong with the engine? Do i need to adjust the valve clearance too? What is the valve clearance for both exhaust and inlet, hot and cold? If i do the valve adjustment and yet still the problem, what is next?

Posted on Jun 07, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to adjust the tapets if they are making noise in Toyota 2e engine


hi
check your engine oil.on low engine oil you will hear tappet noise.
also you can buy tappet noise reducer from motor spare shops.
thanks

Sep 30, 2017 | Toyota Cars & Trucks

1 Answer

Toyota 87 model chisel shape 4a engine tappet setting


The intake valve clearance cold is 0.006-0.010 in. (0.15-0.25mm).
The exhaust valve clearance cold is 0.010-0.014 in. (0.25-0.35mm

Jun 15, 2016 | Toyota Cars & Trucks

1 Answer

What is the tappets clearance for toyota hilux ln85 2wd?


8 12 check out TheAlexManVideos on youtube specifically

22RE Toyota Pickup/4Runner Valve Adjustment

Jun 17, 2014 | 1996 Toyota Hilux

2 Answers

Toyota echo tappets are noisey


I DON'T KNOW HOW MANY MILES ARE ON THE ENGINE. Found no bulletins for noise concern
Intake tappet clearance should be .006"-.010" and
Exhaust clearance should be .010"-.014"

Apr 13, 2014 | 2003 Toyota ECHO

2 Answers

Tappets


0.20mm inlet (engine warm)
0.20mm exhaust (warm)

Apr 13, 2014 | 2003 Renault Kangoo

4 Answers

What are the valve clearances for a 2e 12 valve engine?


I have Toyota Corolla EE80 2E engine with 12 valves. I recently top overhaul but the engine is not running in perfect condition. The engine rpm goes up and down (engine shaky). I set the rpm around 1200, if i set it lower than that the engine will stop. I check the engine timing with both the cam and crank on the correct mark. Sounds like the carburetor failure but i had service it but still the same. If i turn the distributor to the right (******) the engine rpm drop, than i turn it to the left (advance) but the rpm drop too, as i know the engine rpm should raise high and could hear the pinking sound from the valves if the the engine accelerate. For your info, i bought the cylinder head from someone who previously general overhaul his engine about 6 months ago. He dismantle his engine because of con rod problem. I just fix the cylinder head to my engine without grinding and adjusting the valves because it had been grind and adjusted 6 months ago. I check the spark plugs but look all black. I pull the plug cable one by one during the running it sounds all ok. Now i wonder what is actually wrong with the engine? Do i need to adjust the valve clearance too? What is the valve clearance for both exhaust and inlet, hot and cold? If i do the valve adjustment and yet still the problem, what is next?

Jan 02, 2011 | Toyota Corolla Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

2,509 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...