2009 Ford Focus Logo

Related Topics:

T
Timothy Posted on Mar 03, 2014

Rough ideal on 2009 ford focus - 2009 Ford Focus

5 Related Answers

Anonymous

  • 9 Answers
  • Posted on Sep 04, 2008

SOURCE: Rough Ideal on 2004 Ford Explorer

Open hood and listen for vacuum leak sound. pcv hose is most likley cause.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/terry_db4da071b7da3ac1

Ad
honeymokey

honeymokey

  • 3113 Answers
  • Posted on May 21, 2010

SOURCE: 2001 FORD FOCUS IDEALS ROUGH

Check the pcv hose from the intake manifold to pipe under coil pack. They will collapse and leak. Check with car running. If it's idling causing a vibration the passanger side motor mount may need to be replaced.

Anonymous

  • 42 Answers
  • Posted on Sep 07, 2010

SOURCE: 2001 ford focus ideals rough , run great higher

May be a vacuum line loose or cracked. Check those lines from base of carburetor or manifold.

emissionwiz

Marvin

  • 85242 Answers
  • Posted on Jun 14, 2012

SOURCE: My 2009 Ford Focus dashboard vents will blow no air.

You likely have a defective vacuum motor.

emissionwiz

Marvin

  • 85242 Answers
  • Posted on Oct 19, 2012

SOURCE: 2009 Ford Focus wont go passed 350 rpms and seems like it might stall

The following are the general instructions on the start of diagnosing any electronically controlled engine or transmission problem.

The engine and the automatic transmission (transmission control is only for automatics, engine is still computer controlled no matter the transmission type) in this vehicle are computer controlled and in most cases when a fault occurs a fault code is stored in the memory of the computer control module. There are exception to this, such as the Mass Airflow Meter and fuel pressure problems. What must be done is to have all the basic testing done such as a scan of the system for fault codes as well as a check with a live data scanner tool for engine functions that are not within range of normal, a trained technician is required to know what is correct and what isn't, then based on careful diagnostics done from a factory repair manual the correct part is replaced or the wiring repaired or the computer replaced (known as the PCM), which is very rarely the problem. Other basic checks must be done as well such as mechanical problems with the engine as well as engine state of tune and mileage on the engine. The transmission can have mechanical issues as well such as no gear engagement at all or a failed pump or other pressure related problems. Also engine mechanical problems ca cause many drive-ability related problem such as rough idle and other symptoms


Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

2009 Ford Focus SE. Starter Removal?

What's the 2009 Ford Focus starter location?

Vehicle History https://www.vehiclehistory.com > questions > whats-th...
Jul 16, 2020 - The 2009 ford focus starter is located at the base of the engine block next to the transmission housing.

2 answers · Top answer: The 2009 Ford Focus starter location is found by watching: https://www.Youtube.com/watch?v=r4_A61SnGXU You will come into problems with the battery during ...

Ford Focus Starter Replacement Cost Estimate

RepairPal.com https://repairpal.com > estimator > starter-replacement-...
The average cost for a Ford Focus Starter Replacement is between $368 and $433. Labor costs are estimated between $105 and $132 while parts are priced between ...

How in the world do I remove the starter???

Focus Fanatics Forum https://www.focusfanatics.com > threads > how-in-the-...
Jan 15, 2011 - - Loosen lower starter bolt, don't remove yet. Top of car: - Remove upper starter bolts and lift Positive starter cable metal bracket, over ...


0helpful
2answers

2009 Ford Focus throttle body issue

Jeff, your answers should be down here. Doesn't the Throttle Body have a 'Learn Procedure', if replaced?
1helpful
2answers

Why is my 2009 Ford focus idling rough, to the point that it seems like it may stall, but hasn't yet?

many reasons are possible such as needs tune up bad gas idle control needs attention o2 sensors --cat converter - exhaust restriction -fuel delivery are just a few --have vehicle for any codes
1helpful
2answers

What's the name and part number for a 2009 Ford Focus 2.0 cooling fan whiring harness?

ford part # 8C290 Engine Cooling Fan Motor Wiring Harness Partial Zero Emission Vehicle Evaporative Emission
0helpful
2answers

2009 Ford Focus 1.8 engine nearly stalls when coming to a stop rough idle

check for vacuum leaks especially in the vent control hoses or auto box actuator.
0helpful
1answer

Where is the fuse box on a 2009 ford focus?

The fuses your looking for are in the battery junction box under the hood in the engine compartment ! F3 20 amp & F15 20amp !

2009 ford focus !
0helpful
1answer

My 2009 Ford Focus dashboard vents will blow no air.

You likely have a defective vacuum motor.
0helpful
1answer

2001 ford focus ideals rough , run great higher speeds

May be a vacuum line loose or cracked. Check those lines from base of carburetor or manifold.
0helpful
2answers

2001 FORD FOCUS IDEALS ROUGH

This is only a guess, because rough idle can be due to an infinity of reasons. On the Focus, assuming that the spark plugs and wires are all good (check that the wires are seated securely), then very often this is due to a problem with the vacuum lines or the Idle Air Control (IAC) valve. With the engine running, listen closely for any tell-tale hissing sound and try to locate it. Check that the vacuum hoses are all in good condition and that they are securely in place. The IAC is a little more complicated to check. Its job is to let air in when the throttle is closed. If it is not opening as it should then the engine will idle rough. One thing you can try is to remove the IAC entirely, leaving an opening for air to get into the intake manifold. If the engine idles better with the IAC removed, you will know that the IAC has a problem. It could be a problem with the IAC itself or with its circuit. Good luck, if you have any more questions let me know.
Not finding what you are looking for?

39 views

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...