At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Will not start changed the crank shaft sensor will not start changed the crank shaft sensor still nothing injectors wont go to and no spark any ideas please
Re: Will not start changed the crank shaft sensor will...
It could be a computer malfunction or a circuit in the ignition switch has went on you. By the description I get that the spark plugs and the injectors are not working?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
This is something that you cannot afford to throw any more money at. Get a timing light to check to see if there is spark. Use a pressure guage to check fuel pump. Get bug lights to test injectors.
turn over or run
turning over is cranking but not starting/running
not turning over indicates seized motor , bad battery starter motor problems , bad ground
turning over is cranking but not starting ---broken timing belt/chain, crank/cam position sensors , no fuel , no spark , no injector operation
best run the fault codes as the fauty will be recorded there
Do the basic tests. If it cranks good but won't start, have a helper crank it while you check for spark at the plugs. If spark everywhere use a gage and check proper fuel pressure and fuel injector pulse.
Any applicable trouble codes?
You have to make sure first you have spark at the plugs and fuel to the injectors and they are spraying. The computer sends a pulse and tells injectors to spray. Start there and report your findings.
the crank sensor is on the back side of the engine just above the oil pan there will be two sensors there one is the crank sensor and the other is oil presser sensor. All so check the wires from the crank sensor to the cam sensor. If you think it is the timing belt pull the cover and check it. hope this helps.
×