My bluetooth asking of passcode

To use your Bluetooth® wireless technology enabled phone in your vehicle, an initial one-time-only pairing procedure is required. To pair your phone, initiate Bluetooth® search mode in the vehicle. Then depending on the handset, initiate search mode or discoverable mode.* Once the vehicle finds the handset, a Bluetooth passkey is required to complete the pairing procedure.

You may choose any combination of 4 to 16 digits. Enter the passkey on the phone or vehicle, as prompted, and then the other device will ask you to verify it.

If it really is a 2006 or earlier year 335i Coup?, you need the vehicle's Owner's Manual. Since: "Vehicles require a fixed Bluetooth passkey for verification which is included in the vehicle's Owner's Manual."

You can obtain the manual from the dealer, when you provide them with your vehicles VIN-code, for a price of course.

From the BMW USA site:
Bluetooth FAQs

ask toy for help yet.
or any auto repair shop for help.
there is nothing simple with bluetooth, (study autolearn and wow)
check fuses first
then get it serviced.
there are web sites just for car bluetooth, try googling for real
forums on that exact topic?

https://www.google.com/webhp?gws_rd=ssl#q=toyota+bluetooth+forum

hi
this is normally 0000 if it is the built in BT in the car.
hope this helps

Turn on bluetooth on phone.
- settings-bluetooth > on
Turn on bluetooth in car stereo
- Turn on radio, press Menu.- Scroll with knob to Phone. - Press knob to Select.- Turn knob to select Pair.
Back to Phone
- Hit the Scan button to search for BMW bluetooth- Find BMW Bluetooth name on phone and select Pair. - If should ask for a passcode, enter identical pass codes on stereo and phone.

The instructions are the owners manual if the van has bluetooth. If you don't have the owners manual you can download it from Dodge HERE

right dont even think of joining up like coloured wires either get the right multiplug fitting kit or ask a local mechanic to wire it in ,yes i can give instructions but if you dont do as i say you will have a cooked radio

Are you sure the blutooth is active in your car? Contact the local dealer and have them run a "DCS" and confirm the car is fitted with Blutooth. Then go to www.bmwusa.com and check that your phone is apporved to work with the car. Provided nothing is wrong with the car you can then follow the instructions below.

1. make sure your phone's bluetooth is "always on"
2. get your phone all the way to the "search screen" and stop
3. press the "menu button on the radio
4. press the button below the "phone" in the menu screen of the radio.
5. press search on your phone to locate the car.
6. after the phone locates the car press yes to "bond"
7. the phone/car will now ask for a password, enter 1111 and press enter or ok.

Ifyour passwrd does not work you will have to go to the dealer to get the correct one or you can locate the TCU in the driver's rear inner panel in the trunk and get the number off the unit. It will say "PK XXX"

I erased all information on my old phone and re-entered new info. Very simple.

i was told by a jaguar dealer that a phone module c/w bluetooth feature can be added to activate phone system for $1400.00 can