Cars & Trucks Logo

Related Topics:

G
Gary Suess Posted on Feb 13, 2014

Clock spring problems with 2008 Infinity QX56

Driver seat fails to return to prior position when restarting periodically.

5 Related Answers

Anonymous

  • 59 Answers
  • Posted on Jan 06, 2009

SOURCE: front seat springs

the spring is for height adjustment. all other functions will still work. the only fix is to replace the seat frame which is very expensive. you can actually still adjust the height but not while you are in the seat your weight will keep it from raising. Just remove the spring so it doesnt jam under the seat and everything else will continue working fine.

Ad
chitownbob45

chitownbob45

  • 316 Answers
  • Posted on Oct 07, 2009

SOURCE: driver seat not operating. Does the seat have a fuse?

power seats have a fuse.

Testimonial: "thank you found fuse "

duane_wong

Duane Wong

  • 6826 Answers
  • Posted on Jul 05, 2010

SOURCE: my back brakes are making noise, what type of

Try your parts store for this one. They have a wide range of different brake pads for your vehicle with prices going up for the better ones.

I use Wagner on my 1997 Cadillac deville that do not require shims as they are built in.

These are fool proof pads.

Good luck to you...

Anonymous

  • 869 Answers
  • Posted on Mar 23, 2011

SOURCE: I replaced the blower motor in my 05 infinity qx56

u need to check for the relays and fuses on ur infiniti.

emissionwiz

Marvin

  • 85242 Answers
  • Posted on Jul 07, 2011

SOURCE: 2007 infinity qx56 lift gate

Hello
The 1st thing you should do here is clean and lubricate all the parts, this includes the door edge rubber seals and the lock and latch assembly, this easies the amount of force needed to latch the door and many time cures the problem. To lube the rubber hatch seals get a can of Silicone spray from any auto parts store or hardware store, using a rag soaked with the silicone (shake it before use) clean and generously lubricate the rubber seals around the edge of the hatch. To lube the latch itself get a scan of spray Lithium grease, it is a white grease designed for lubricating these types of mechanisms, if the latch is full of dirt and grim clean it first with a product called Brake Clean, it dries very fast and will remove the old grease and dirt, after it is clean re-apply the spray Lithium grease to the latch mechanism. CAUTION! Do not get these products on the paint or plastic trim of the interior, it can discolor it, tile trim with masking tape or a rag while you apply it..

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Need a schematic for headlight relay on 2007 infinity qx56 the fuse box dnt show which it is lowbeams not working

System Description INFOID:0000000003533333 Control of the headlamp system operation is dependent upon the position of the combination switch (lighting switch). When the lighting switch is placed in the 2ND position, the BCM (body control module) receives input requesting the headlamps (and tail lamps) illuminate. This input is communicated to the IPDM E/R (intelligent power distribution module engine room) across the CAN communication lines. The CPU (central processing unit) of the IPDM E/R controls the headlamp high and headlamp low relay coils. When energized, these relays direct power to the respective headlamps, which then illuminate.
https://www.nicoclub.com/service-manual?fsm=QX56/2007/LT.pdf
0helpful
1answer

I have a 2008 Nissan frontier that the airbag indicator light is flashing 1 long and 2 short flashes, the horn and cruise control stopped working. Clock spring, grounding??

Sounds like it could very possibly be the clock spring. If you can scan the SRS module, it should let you know what the fault is. It's not very often that clock springs fail unless someone has been into the column and had it apart.
0helpful
1answer

Qx56 will not play any cd

Put in a CD that is fairly new that you have not recorded and see how it plays. If a new CD plays well then it is possible that there is an issue with either the CD itself or the head within the CD may be out of alignment. If all else fails then take it to a reputable audio installation facility or the Infinity dealership in your area. Depending upon how you feel about your Infinity, you could do well with a third party CD player. Are you having any other audio problems?
0helpful
1answer

How many fuse box does a 2004 nissan infinity QX56 has

There is an Intelligent Power Distribution Module (IPDM), a Fuse & Relay Box, a Fusible Link Box, and a Fuse & Fusible Link Box, all of which are located at the right side of the engine compartment.
Then there is the Instrument Panel Junction Block, which is located behind the driver's side kick panel.
1helpful
1answer

How to change rear barke shoes

Brake Drums & Brake Shoes Removal & Installation To Remove:
Rear Drum Brakes kia-09-18-7627.gif

  1. Raise and safely support rear of vehicle.
  2. Release parking brake.
  3. Remove rear wheel assemblies. NOTE: If brake drum is stuck, install two 8 mm bolts into threaded holes and tighten evenly.
  4. Remove top return spring, front and rear shoe spring clips and hold-down pins.
  5. Remove anti-rattle spring and adjuster spring. NOTE: Note position of operating lever prior to removal.
  6. Remove bottom return spring.
  7. Remove clip and washer and detach parking brake cable from rear shoe.
  8. Remove brake shoes.
To Install:
  1. Lubricate all brake shoe contact points with appropriate grease.
  2. Place operating level into position on hub.
  3. Install rear brake shoe and connect parking brake cable to rear shoe with washer and clip.
  4. Install front brake shoe and install bottom return spring.
  5. Install hold-down pins and spring clips.
  6. Position operating lever and install top return spring.
  7. Install anti-rattle spring and adjuster spring.
  8. Install brake drum and screws.
  9. Adjust brakes and install rear wheel assemblies.
prev.gif next.gif
0helpful
2answers

I have water in the headlight of my 05 Infiniti QX56

at times the water in the headlight may not be related to it not working. Check the socket for the light. Check the wiring and the relay for loose connections or exposed wiring. Water may enter exposed wires causing it to fail. Check also the rubber seals. It may have corroded due to heat. See if you can have silicon seal any opening on the glass part of the headlamp.
1helpful
1answer

Seat Position Cant be moved

The manual lever to release the seat is supposed to have a spring on it to return the release lever to the lock position, if the lever does not spring back when you let go of the seat adjustment lever then you know there is a missing, dis-connected, or broken return spring.

If this is the case try putting the seat where you want it to be and make sure that the adjustment lever returns to the lock position, now check to see if the seat will lock in with the adjustment lever in the lock position.

If it does lock in repair or replace the return spring.

Make sure that the adjustment lever is attached to the locking linkage and it does move the locking mechanism.

If it still does not lock into place then there is something wrong with the seat locking mechanism, and some WD-40 sprayed onto the seat rails and track might release a stuck mechanism, and if everything seems to be working alright, and you can see that the locking mechanism in the seat rail is moving in and out of the lock position, then the locking tabs are most likely sheered off and you will need to replace the seat.

Also look under the drivers side seat and compare the lever position and the linkage connections with the passenger side seat, and make sure that it is all operating like the drivers side seat.
0helpful
1answer

2007 infiniti qx56

It sounds as if you are having a battery problem. You need to have the battery checked at an Infinity Dealer. The battery should have warranty on it (pro rated) with such a new vehicle. Hope this helps.
Not finding what you are looking for?

178 views

Ask a Question

Usually answered in minutes!

Top Infiniti Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

926 Answers

Are you an Infiniti Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...