SOURCE: have trouble code po135 on a mitsubishi eclipse,
Oxygen sensor. try this link & scroll down until you find your codes.
http://www.troublecodes.net/mitsu/
SOURCE: 2000 mitsubishi eclipse gt. Where can I find buy
i found one at www.cartruckmanual.com and they have some in stock now
I’m happy to assist further over the phone at https://www.6ya.com/expert/john_2c7bb9c157d0baa8
SOURCE: What does trouble code PO 603 mean for a 2007
P0603 Internal Control Module Keep Alive Memory (KAM) Error. This code occurs if you've altered your computer from stock settings
SOURCE: 1999 mitsubishi eclipse 2.0L na. no start.
On this model engine, the power to the coil pack is delivered directly from the power transistors located inside the PCM.
If you are not getting the signal to fire going into the coil, verify you are getting a good waveform from the crank angle sensor, and that the wiring from it to the PCM is intact. If the crank sensor is delivering signal to the PCM, and the PCM is not generating pulse via the internal power transistors, the PCM has failed (the power transistors blow open, it is fairly common on this Chrysler PCM).
SOURCE: I need to put the code in my eclipse and do not
You can go to the dealer with vin# and get your radio code.
141 views
Usually answered in minutes!
×