SOURCE: obd II location problems...
Front seating area, driver side, under dash, mounted above kick panel
SOURCE: expansion valve location
raven 1g: Your car doesn't use an expansion valve. It uses a fixed orifice tube which is located in the smaller of the two A/C lines, just before they enter the cabin area of the car.
Just disconnect the line and pull the orifice tube out of the line. Be careful not to break off anything and leave it in the line.
SOURCE: 2000 mazda 626 check engine light went on . code
probley not egr valve it probley egr control solenoid or wiring
SOURCE: 2002 Mazda 626 Horn Fuse
Under the hood under a black cover. On the underside of the cover it will tell you which fuses are for what.
SOURCE: were is the egr valve located for mazda rotege5
2002 Mazda Protege5 with the FS2.0 Motor. The EGR Valve is located below
the throttle-body. You must take off the Intake tube to get a good view
of it. To replace it I think you might have to take off the
throttle-body.
Fig. Exploded view of the intake manifold assembly with 2.0L
(FS) engine
Good luck (remember rated this).
104 views
Usually answered in minutes!
×