Front seat wont back and forword move passenger

The easiest way in is usually to hook the rod with a slim jim. If the door panel has to come off with the door closed, you will probably want to remove the passenger seat for access.

Remove seat from slide assemb ly 4-6 bolts

There is a D shaped handle on the side of the seat nearest the door. Lift up on it and the seat back will fold forward, and the entire seat mechanism will lift up and to the front, giving your passengers room to get into the back seat. Simply push the seat back toward the rear of the car to set it back in place; it will lock itself down once it's back in its original position.

first check to see if anything is blocking the tracks if so remove. next it could be the switch if passenger side has controls try swapping them if passenger side does not have controls take switch off and check the resistance in the switch when in the on position (forward or back) if it is not the switch motor is probably burned out if passenger side again has motor try swapping. (passengers don't need to be comfortable) or just buy a new motor. hope this helps

Check the spring which puts tension on the lever to hold it in the lock position this may have dislodged itself or be broken or possibly bent.

Get WD40 from store spray at all around the seat hinges and wait until pass through everywhere. After 10 minutes sit on the seat and try back and forth. WD40 is very useful lubricate you should have it your household items.
Hope it works.

check to see if there is power to the buttons and to the motor. If not, check the fuse and look for any relays of any kind.

you try moving your seat foreward when the car is on flat ground or when the rear is higher than the front.It also happen to my pajero fieldmaster

the only way to do this is to take the seat out remove it from the rails take the rails to a machine shop and have them weld on extensions for the seat to slide on. you will also have to remove the rear seat stop so it will go further back and have them make catches in the extension for the seat to catch onto.

First slide the seat to the back. You will find a bolt in the track on both sides. Remove them. Then move the seat forword and you will find 2 more bolts in the rear of the track. Be careful of the wires as you remove the seats! Frankster016