- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
? 2:55
www.youtube.com/watch?v=ZJ1jFK4weUE
Mar 28, 2011 - Uploaded by DirTyOhGee
89 Ford Ranger 2.3 Custom/Limited. Moving right along here, ...How to change the timing belt on a Ford 2.3L engine. - Duration: 29:59. by ...
there is a spout connector flat square gray in color located in the area of the distributor of lying on the intake taped to the wiring harness.there is a two wire plug(called the spout) that has a flat cap that is removable.with the engine running pull the cap out of the spout and with your timing light attached check the timing marks and ensure it is timed correctly.if not loosen the distributor hold down bolt and move the distributor until the timing is set.turn off the engine reconnect the spout cap and ensure the check light is off.
On your radiator cover or under hood sticker should say what degree the timing should be set at, then you will need a timing light and on your harmonic ballencer you will see the numbers 0 btc and so on. get a light anf pointit at them while turning distibuter.
first you need a timing lite second when you start it you hold the timing lite at the crank there are degree marks near the crank you should clean the crank and there is a mark on it remark it with white chaulk thats how you set timing
×