Dsc not available, abs light on, park break malfunction and check engine light on idles high and when i press the gas it wont go over 10 miles and hour

88k ..drive and reverse gears working but in park or neutral it idles high. then when attempting to drive it seems as if it is not getting gas it revs to 2k rmp and when i release the gas it goes down and the car jolts a little faster. what could be causing this and how do i make it stop so i can get home?

1 Answer

deton8 von Splosion

Jaguar Master 3,342 Answers
Posted on Jan 04, 2018

deton8 von Splosion

Jaguar Master

Joined: Dec 27, 2010

Answers

3342

Questions

Helped

928693

Points

54123

Your Dynamic Stability Control and ABS are both critical safety system... Rather than TRYING to LIMP home...
Park BRAKE means focus on the REAR AXLE...!!

It might be Wiser to has a look at each wheel... and under the car to see if a ROAD-HAZARD has taken out speed sensor...
or a similar SAFETY SYSTEMS impairment...

Getting a FREE read from an AUTOZONE (were they're
very likely to try to peddle OXYGEN SENSORS...
(even if your wheel & tire are gone (in MY opinion))...
might be better WITH ALL THAT rather than trying
to LIMP home...

Go to the JAGUAR (lovers) forum... for FREE help at
http://www.jaguarforum.com/showthread.php?t=75161

ELSE
I personally purchase the FACTORY WORKSHOP
repair manuals (XJS: quite expensive)... but WORTH it.

Much cheaper than letting "DEALERS" mess...
things up ...
Be safe... (tow it home... part of that British Charm
(standing by the roadside waiting for a lorry)).

5 Related Answers

Anonymous

2 Answers
Posted on Dec 12, 2008

SOURCE: 2001 XJ8 Vanden Plas engine light

I've had the same problem on my 2001. It turned out to be the battery. Apparently the voltage had dropped to the point that the computer began to malfunction. I'd first go to a battery shop and have it checked under load before looking for other solutions.

Anonymous

3 Answers
Posted on Feb 18, 2009

SOURCE: Jaguar, S-Type, 2004 will not accelerate after dash sign came on

one of tha abs and traction sensors has blown

Anonymous

1 Answer
Posted on Mar 12, 2009

SOURCE: 2003 Jaguar x type alerted that cruise not

discoonect the battery, turn the key 5-6 times to start then re connect battery. This will reset the computer and could reset the fault

Anonymous

212 Answers
Posted on May 24, 2009

SOURCE: DSC and ABS Not avail lights come on after driving.

There is a switch underneath that goes out due to the debris underneath. Either take it to the shop or deal with the lights comming on.

Anonymous

1 Answer
Posted on Sep 27, 2009

SOURCE: Engine system fault,park brake faultengine system

how do i fix or reset this fault
Engine system fault,park brake faultengine system fault, park brake fault & dsc not avilable

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

1helpful

1answer

2000 Ford E-250 5.4L Idling high.

you might need to do a idle relearn procedure. Since you done replaced the valve.
You can reset the idle air control (IAC) valve by turning the car on, putting the car into park, pressing the brake down, then pushing the gas pedal down, counting down about 5 seconds, turning the car off, waiting 10 seconds and start the car again, checking to see if the car is idling properly.

Read full answer

Aug 26, 2022 • Ford Cars & Trucks

0helpful

1answer

2013 Mazda 3 ABS & TRACTION LIGHT.

If the light stays on, the TCS, DSC or the brake assist system may have a malfunction and they may not operate correctly. Take your vehicle to an Authorized Mazda Dealer. In addition to the indicator light flashing, a slight lugging sound will come from the engine. This indicates that the TCS/DSC is operating properly.

TCS/DSC Indicator Light - 2020 Mazda3 Owner's Manual ...

There was a recall on the ABS Module.

https://www.google.com/search?q=mazda+3+abs+module+recall

You need the dealership or an auto electrician with a pro grade scan tool computer to check the live data and record it as you are driving.

Read full answer

Jun 19, 2022 • 2013 Mazda 3

0helpful

1answer

1996 ford escort lx engine runs to fast

If it idles high, with it in park, block off mouth of throttle body with something, it should kill the engine. If very little or no effect on idle, you have false air getting in there from somewhere.
Make sure throttle valve is closing, where applicable, take throttle cable loose, see if idle returns to normal. Check and clean idle air system. Any applicable trouble codes?

Read full answer

Aug 15, 2017 • Ford Cars & Trucks

0helpful

1answer

Turn off check engine while abs control module is not connected

have vehicle checked for trouble codes any autozone or parts store most will check it for free .You should than have an idea what is still wrong. If you feel this was helpfull please leave good feed Back

Read full answer

Dec 23, 2014 • 2008 Hyundai Tucson

0helpful

1answer

2002 ford windstar rough idle

Sounds like you never diagnose any fault codes
& just continue to drive on

ABS,Brake light,Evap,now a failed transaxle

Read full answer

Sep 01, 2013 • Cars & Trucks

2helpful

2answers

My truck wont start unless i prime the carborator first, then it wont stay running unless i rev it high just before i put it in gear, or im accellerating...

To start with, you have a throttle body instead of a carburetor.
On that throttle body is a component called an air control valve.
That valve is how the computer controls the idle speed. It should open and close the air flow into the intake manifold as needed.
Is the check engine light on when you are driving ? Have you checked the fuel pressure ?

Read full answer

Jul 30, 2012 • Chevrolet Silverado 1500 Cars & Trucks

0helpful

1answer

Blazers in park = rattling noise ..... Blazers in drive = whining sound & while driving on interstate (ranging 35mph-65mph) I can feel it hesitate when I press on gas almost as if it can't (but it doe)...

have you had the catalytic converter checked. When they break apart they will make a rattle ling noise. eventually the broken pieces will plug the exhaust and cause a lack of power feeling. When the exhaust is cold hit the bottom of the catalytic converter with your hand. If it rattles it is bad and needs to be replaced.

I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa

Read full answer

Nov 04, 2010 • 2001 Chevrolet Blazer

0helpful

3answers

The engine starts and runs in idle, ABS light is

that is your anti-lock-brake system warning light take to a pro

Read full answer

Oct 07, 2009 • 2003 Nissan Pathfinder

5helpful

2answers

2001 Mercury Grand Marquis brake and ABS dash lights on and off

The red brake light is the key here. That usually indicateds a hydraulic problem. Check you fluid level in master cylinder and see if it is low. Also the level indicator sensor there in the master cylinder maybe sticking or corrioded. If ABS sees the red brake light it will shut off and turn on the ABS light,also traction control would be disabled as well.

Read full answer

Feb 04, 2009 • 2001 Mercury Grand Marquis

0helpful

1answer

Jaguar, S-Type, 2004 will not accelerate after dash sign came on

one of tha abs and traction sensors has blown

Read full answer

Feb 03, 2009 • 2004 Jaguar S Type

Not finding what you are looking for?

View Most Popular

2003 S-Type

Cars & Trucks

2000 Ford E-250 5.4L Idling high.

Ford Cars & Trucks

152 views

Ask a Question

Usually answered in minutes!

Have a manual for 2003 Jaguar S-Type? Or just drag it here!

Related Topics:

Dsc not available, abs light on, park break malfunction and check engine light on idles high and when i press the gas it wont go over 10 miles and hour