Here is a diagram for a 5.7L Hemi, and 1 for a 5.9L diesel. Hope this helps!
5,7L HEMI
5.9L Diesel
Part of the problem in replacing the serpentine belt is that Dodge failed to place a belt diagram on the apron in the engine compartment or in the owners maual. Although I see a diagram here, there are no instructions with it. It is vitally important to note that the new belt does not go around the fan. It is installed behind the fan, towards the engine and using the above diagram you should be able to fish the new belt around all of the pulleys and the tensioner. It is really helpful to have another person there to help place the belt on the upper pulleys while the other person is underneath the truck. I hope this helps whoever sees it. Thanks, Rick
SOURCE: serpentine belt diagram:
The belt routing diagram is located on the top radiator cross member by the hood latch. You should see it when you open the hood. If it is not there, all Chrysler, Dodge, and Plymouth minivans, from 1993 to at least 1999, used the same 3.3L engine setup, so find someone with one and look for the diagram where I described.
SOURCE: serpentine belt diagram:
if yours has the 3.8L then here is the diagram. Hope this helps
~ Zach
SOURCE: need routing diagram for 2000 lincoln town car serpentine belt
There's a diagram at this link.
Below is the master help link
provided to go through belt routing diagram:---Timing belt, drive belt,
serpentine belt, accessory belt, fan belt, engine belt routing diagrams for all
types of car models?
Click the link below: ----
http://carbeltrouting.blogspot.in/2012/02/timing-beltdrive-beltserpentine.html
----------This will help. Thanks.
Below is the master help link
provided to go through belt routing diagram:---Timing belt, drive belt,
serpentine belt, accessory belt, fan belt, engine belt routing diagrams for all
types of car models?
Click the link below: ----
http://carbeltrouting.blogspot.in/2012/02/timing-beltdrive-beltserpentine.html
----------This will help. Thanks.
10,666 views
Usually answered in minutes!
i cannot find the serpentine belt diagram for a Merc 220 cdi 2008 model. Can you believe when i asked the agents the guy told me they dont have one. Can someone help? 8 pullys
×