Car cranks but it does not start i smell gas but the plugs are dry no spark
SOURCE: No spark, 1988 Toyota Camry 3SFE 4cyl, 5 speed.
there is no crank sensor on this vehicles 2.0L. If you have power to the coil, new coil, cap and rotor try this if not done yet>>>Unplug coil power first....Try pulling off the distributor cap, and make sure the rotor is spinning with the cam...If this fails to spin, inspect the entire distributor assembly. If it passes, Inspect all the power circuit and wiring to the dist assembly, if ok possible ecu. i recommend having a mechanic check it out!! Hopefully this helps...please rate...thanks
SOURCE: Hi, I've sent my toyota
To have so many different codes at the same time indicates that the first place to start looking is the wiring harness itself. Locate the MAP (manifold air pressure sensor - code 31) and IAT (inlet air temperature sensor - code 24) connections. Disconnect and reconnect each sensor a few times and check that the connecting socket and pins are clean and free of corrosion - the codes indicate intermittent breaks. Check all fuses are clean and well mounted. Examine wiring harness for chafing, abrasion and signs of wear. Any intervening connections between the wiring harness and electronic control unit (ECU) need to be checked over and should be free of oily grime.
124 views
Usually answered in minutes!
×