94 jeep wrangler. Replaced fuel pump relay, fuel pump, cap, rotor

Chevy 2500HD No Start No Spark No Fuel Cranks OK
Testing !!!

Did u check fuel pump.

Absolute pressure sensor

Check to make sure the check engine light is coming on, on the dash, when you turn the ignition switch on. If it is not coming on, try leaving the ignition on for a few minutes to see if that light does come on and the jeep starts then. If so, then your ecu computer is in need of repair.

So it gets spark and fuel correct? Have you checked the compression?

pretty much a whacked pump. I had the same prob years ago and its not fun to change.

try idle air sensor

could be the fuel pump relay, do you hear the pump prime when you turn on the key? if not then replace the fuel pump relay.

Could be one of several items...I'd check the fuel pump relay, auto shutdown relay and the ignition switch itself. I'd bet on it being one of those relays but, we all have been fooled at least once!!! I'd also make sure that body and engine grounding is good and clean. Relays can't work properly without a good ground.

have you checked fuel pressure regulator.hopefully this helps