Po341 is camshaft position sensor A bank 1 ckt range/perf and po122 istps/pedal position sensor A curcuit low input this is throttle position switch on side of throttle body!
po122 on 3.1 is---tps pedal position sensor A curcuit low input!! po341 camshaft position A-bank 1 ckt range \perf.
po122 on 3.1 is---tps pedal position sensor A curcuit low input!! po341 camshaft position A-bank 1 ckt range \perf.
po122 is tps pedal position sensor!! and po341 is camshaft position sensor A- bank 1 ckt range/perf ----throttle position sensor is on side of throttle body at the throttle plate,it is black and has two screws or rivets. cam sensor is under power steering pump on 3.1 to remove. take out power steering pump and set aside do not remove hoses, sensor is reachable, it has only 1 bolt holding it in,
po122--tps/pedal position sensor A curcuit low input,--po341---camshaft position sensor A -bank 1 ckt range.
tps curcuit is low this could be a bad sensor or wire. po341--camshaft position sesor A- bank 1 ckt range/perf-- this is possibly a bad cam sensor. tps is code--po122,
po1220is the fault code for the tps(throttle position sensor). it is mounted at throttle plate on side of throttle body. po341 is the camshaft position sensor the 2-4 and the 3.1 have cam shaft sensors the 2-2 does not. on 2-4 it is on top of engine just before valve cover, on the 3.1 it is under the power steering pump
×
P0341 is a cmashaft position sensor fault code, p0122 is throttle position sensor intermittant or low voltage
Need to know how to reset computer
2,233 views
Usually answered in minutes!
×