Need help locating the acuator on my van
Is the heater not working in the front of the van, but is working in the back? You might mean the 'blend door actuator'. It's not easy to get to. The correct way is to remove the dashboard. Search YouTube for 'Windstar blend door actuator' to get some ideas.
I fix it without removing the dashboard, the best is to change the actuator taking the radio out, its just a small actuator, the Original part is a square white or beige color, you will have a better idea if you look for AC & Heater Blend door actuator en google. 4 screws attach it to the hearter. I found that the door was getting stock inside AC Heater unit, then the actuator get damaged; as soon as you want heat, you will hear a "tact-tact-tact" several times, unless you move the control to cool cool side. Check the fix that I include in Fix Ya, for a 2001 Windstar, you will have better idea of how to fix the door to avoid damage another actuator. You should pay for no more than $80 Ford part in a dealer or Parts Shop Store. I hope this helps.
×
SOURCE: Diagram of Location of a Starter Motor on Ford Transit 2002/2003
i have a 2001y reg transit tipper and i think the starter motor is going when i go to start it like grinds then some times it starts perfect
SOURCE: Replace alternator 2001 ford windstar van
Hi, first you disconnect the battery. then you need to take the belt off by the back pulley. But you don't need to take it all the way off. Just so you get the alternator belt off. I just replaced the one on my 1997. Then you have three bolts, and one small nut to remove . Then put all back together the way you took them off.
Take care
SOURCE: how to change ignition coil pack on 2003 ford
the coil pack is located on nthe back valve cover, bank1, towards the firewall.
it mounts with three bolts or torx screws.
it is kinda hard to get to but just pull off the plugwires and
it will give you more room.
there is also i radio capacitor thing that is retained by one of the bolts,
298 views
Usually answered in minutes!
×