2007 Dodge Nitro SLT Logo

Related Topics:

A
Anonymous Posted on Jan 25, 2014

How to change spark plugs on 2010 Dodge Nitro

5 Related Answers

Anonymous

  • 137 Answers
  • Posted on Feb 18, 2009

SOURCE: changing spark plugs

as you know the front ones are rather easy to get to, but the rear bank is a bear..the best way is on a lift but you can get to them using a 3/8 rachet a 3inch extension and the plug socket.. take the air tube off the throttle body.. reach under the throttle body behind the engine you will feel the plug wires that way.. once you get the wires off the plugs are a pain but changable..

Ad

marley mcelhinney

  • 490 Answers
  • Posted on Jun 12, 2009

SOURCE: i need a spark plug wire diagram for a 2007 dodge

you shouldnt need a diagram there should be numbers on the tension leads coming from the distibutor and numbers on the engine block near the spark plugs just match the numbers and the leads are usually different lengths, also the distibutor cap has to be in the correct position if not it is basically the same as crossing the wires and putting them in the wrong spot which will stuff up the firing order

Anonymous

  • 63 Answers
  • Posted on Nov 19, 2009

SOURCE: How many spark plugs does the Dodge Nitro 2007

well its a v6 so it needs 6 spark plugs and you should get the NGK iridium spark plugs just go to your local autoparts store and order the best ones they have

Anonymous

  • 191 Answers
  • Posted on Jan 04, 2010

SOURCE: 2008 dodge nitro 3.7 engine. The engine missfires

Have it checked for trouble codes sounds like it could be an injector problem or something as serious as a loose rocker,maybe try a crank&cam shaft position sensors

Anonymous

  • 1297 Answers
  • Posted on May 16, 2010

SOURCE: how to change the back 3 spark plugs 98 dodge

you have to remove the upper intake manifold

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

Where can I get the diagram for the plug n wiring for a 2010 dodge nitro aluminum engine 3.7l also the firing order

Dodge, you have to pay for it- usually the schematics are provided for a time period and then you will loose access unless you pay again. Good Luck
0helpful
1answer

On my 07 doge nitro do you replace coil along when replacing plugs

Nacho, Coils are not normally replaced when changing spark plugs. Use the factory recommended plugs(OEM) . Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
http://www.nitroforumz.com/threads/changing-spark-plugs.30635
Changing Nitro Plugs 3 7 4 0L
how to change spark plugs in dodge nitro
More Information for NGK 6987
0helpful
1answer

Transfer case problems

    2007 Dodge Nitro Recalls - Cars.com

    www.cars.com/recalls/dodge/nitro/2007/

    Cars.comLook up all NHTSA vehicle safety recalls for your 2007 Dodge Nitro, and contact ...THE TRANSFER CASE HEAT SHIELD MAY DROP DOWN AND RUB ON THE ...ADDITIONALLY, THE DRIVE SHAFT FAILURE WILL RESULT IN A LOSS OF ...

    Differential and Transfer Case ' Dodge Nitro Forum

    www.nitroforumz.com > ... > Detailing and General Maintenance Forum
    Jul 24, 2010 - Vehicle: 2007 Nitro 4X4. Trim: SLT. Color: Black. Found this while searching for instructions on Front/Rear Axle and Transfer case fluid changes ... transfer case leak
    Aug 21, 2014
    Front Axle CV Joint
    Nov 24, 2013
    Leaky Transfer Case
    Oct 4, 2011
    More results from www.nitroforumz.com images for 2007 Dodge Nitro Transfer case problems
0helpful
1answer

How do I take the drivers side spark plugs out on a 2010 dodge nitro 3.7 engine?

Driver side and passenger side spark plugs come out the same way. Remove the coil pack (individual coil for each plug) using a 10mm socket, then use the spark plug socket with an extension to remove the plugs from down in the tube that the coil pack was removed from.
0helpful
1answer

How can I locate my spark plugs on my 2008 dodge nitro?

The spark plugs are under the coil packs. Remove the screw and pull up on the coil pack you will find the spark plugs there. On a v-6 engine there will be six coil packs three to a side. Just be careful removing the coil pack pull straight up as there is a long plastic plug under it that is the coil wire. Its is better to be safe then sorry just take your time you will be fine.
0helpful
1answer
0helpful
1answer

2010 nitro dodge front vent not blowing air

Blend air door inop, either from vacuum leak, bad check valve or bad actuator.
0helpful
1answer

I need to find the THROTTLE in my dodge NITRO 2010

its located on or in line with the intake manifold, follow the air ducting from the air box and it will lead you right to it
1helpful
2answers

I have a 2010 dodge nitro. The roof mount antenna got broken off and part of it is still in the base. any suggestions

TAKE A SMALL SCREW EXTRACTOR TAP IN & TURN OUT WITH CRESCENT WRENCH SHOULD REMOVE IT.
Not finding what you are looking for?

340 views

Ask a Question

Usually answered in minutes!

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...