2003 Ford Windstar Logo
Posted on Jun 01, 2009
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Transmission van will not move in any gear, fluild level is fine, it made no noises or anything, went to put it in reverse & nothing, the linkage under hood is moving however the car still does not move.

2 Answers

Anonymous

Level 1:

An expert who has achieved level 1.

  • Contributor 1 Answer
  • Posted on Jun 16, 2009
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Joined: Jun 16, 2009
Answers
1
Questions
0
Helped
291
Points
1

I would check your torque converter. i had the same problem...van would not move in any gear...had torque converter replaced along with filter kit, front seal, and 2 axle seals....works like a dream...one shop mentioned a sprag gear....i went to annother and they replaced the listed items...no problems now...120,000 miles on my van now...good luck...

Anonymous

Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Sergeant:

An expert that has over 500 points.

Champion:

An expert who has answered 200 questions.

  • Expert 223 Answers
  • Posted on Jun 01, 2009
Anonymous
Expert
Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Sergeant:

An expert that has over 500 points.

Champion:

An expert who has answered 200 questions.

Joined: Jun 01, 2009
Answers
223
Questions
0
Helped
134586
Points
694

Check your universal joint...might be broken.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

My 1998 Dodge caravan (3.0 v6 with 3 speed trans) was running fine until one morning I start the van and put it in reverse...nothing, put in drive, 2 and 1 and nothing. It can be pushed in every gear...

With the van in park or neutral with e-brake on, and engine running, pull the transmission fluid dipstick, notice there's no fluid on the dipstick. Put a quart of transmission fluid in the dipstick tube, with e-brake still on, put the van in gear. R or D, and see does the van try to move against the brake. If it tries to move, engine speed drops, put it back in neutral or park and check the fluid level again. If it's still low, put in a little more till it's to the full mark.. Done. Check under the van and find the area where fluid is dripping out and fix it. If it's the pan gasket, replace it. Replace the filter while the pan is down.
0helpful
1answer

My van starts just fine but when i put it in ANY gear it wont move!

1st check the Transmission Fluid level, if good check your shift linkage to see if it is still connected to transmission.
0helpful
1answer

Holden comm ute 96 automatic put into reverse but doesnt move just revs

I suspect that changing the tranny oil will not solve your problem. At best when the pan is removed to change the oil filter you will probably find clutch parts in the sump. However having said that take it to a tranny shop and have the pressures tested before doing anything else
0helpful
1answer

2003 Ford Taurus--about 1 week ago heard noise under hood but car continued to drive okay. Then, I went to go to work, it cranks fine but when I shift into a gear, car does not move. Looked at belt under...

You say transmission fluid levels are good. Is it a nice red or pink color or is it an orange, brown to black color. Does the vehicle actually shift into gear, the linkage from the gear shift from park to drive or reverse maybe be unhooked you can check that out also. Does the trans fluid smell burnt, should be kind of a sweet smell. Good Luck
0helpful
1answer

No reverse all of a sudden

check power to the reverse shift solinoid
3helpful
1answer

I have a 97 VW Golf auto trans, I have no reverse gear, no noise when placed in gear it just wont move, all forward gears work fine, any ideas for me

Check your fluid level to make sure its up to the specified level, then I'd be checking out your linkage from your shifter inside the car right to the transmission, it sounds like to me your linkage may be worn enough to put the vehicle in drive but not reverse. The linkage bushings are a common problem on vdubs. See if you can put the car in reverse by moving the linkage arm directly attached to the transmission (make sure you have someone in the car with the brakes on or caulk the wheels) if it does go into reverse when you manually move the direct linkage arm at the transmission then replace your linkage bushings, if not then the only other problem would be a transmission internal problem. Good luck

vdubs 4-ever
0helpful
1answer

1992 jeep wrangler has no revers

check your linkage from shifter to transmission.or if its a cable shift the cable may be broken.Smell the transmission fluid see if it smells burnt.if so then tranny reverse has went up
0helpful
1answer

Goes in reverse but dont move. in drive only goes 10mrh.

I think you need to bring that thing to a transmission shop. it is a bit surprising that a 5 y'old car would have a bad trans but maybe a transmission shop can save it. GL
Not finding what you are looking for?

301 views

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...