This sounds like a encoder, you need to pull the error code for this. Not all readers will give you the ABS codes. You can try at the local auto parts store, most of them will pull the codes for you.
SOURCE: How do you reset service stability control & ABS
please send $100 to me and ill send you solution.. I was interested in your service until i heard some of your answers like requires expert must take to pro??? gee thanks for $15 advice
SOURCE: abs light/traction control light
You can check out what the trouble code is by pushing and holding the information button and the up arrow (right side of instrument cluster above the radio) until all the instrument clusters light. Press the information button (last) to enter test mode. I've had an error C1234, meaning Left rear wheel sensor fault. I found the problem to be a corroded connector under the chasis just under the rear left door about 2 feet in. I had to by-pass (replace 1 wire due to corrosion at the connector.
SOURCE: service stablization system light intermittently
it is saying you have bad stuts. you need to have it scanned to see which ones are bad.
Testimonial: "Thanks, solves the mystery"
SOURCE: service stability system light flashes
i hav the same problem wit my 98 deville wat did u do to fix it and wat was the cheapest way. Also did u have anyother problems wit ur car during the time u were driving it wit these lights on
SOURCE: service stability system and brake assist lights
that should be warranteed..but check with obd2 get code maybe wheel sensor
176 views
Usually answered in minutes!
×