Resetting after installing a radiator on nissan almera

Question edited for clarity.
Question moved to model category.

Reset the security system and engine immobilizer. Connect a code reader scan tool as see what it shows.

https://www.google.com/search?q=2005+Nissan+Almera+reset+security

..

Nissan Almera alarm help??? ' AVForums

www.avforums.com > Forums > Lifestyle Forums > Motoring Forum

Feb 19, 2007 - Last night I went to drive home, switched the alarm off, unlocked the ...Remove negative terminal on battey for 3 minutes to reset your alarm.

Greetings, I read your question and I think Reliable-Store can help you in this. Here's the site link. 2006 Nissan Almera Workshop Repair Service Manual PDF Download

Gregory, your throw out clutch bearing is worn. You should just install a new clutch kit.

Water Pump Removal & Installation To Remove:

1. Allow the engine to cool and drain the coolant from the radiator and both engine block plugs.
2. Remove the fan shroud and both radiator hoses.
3. Remove the drive belts.
4. Remove the water pump pulley.
5. Remove the crankshaft pulley.
6. Remove the timing belt covers.
7. Remove the water pump.

Water pump removal/installation

To Install:

1. Install the water pump with new gasket.
2. Install the timing belt covers.
3. Install the crankshaft pulley.
4. Install the water pump pulley.
5. Install the drive belts and fan shroud.
6. Install the radiator hoses.
7. Install the coolant drain plugs.
8. Refill the cooling system.

your local library has repair manuals you can check out.

Contact a local nissan dealer and give them the VIN# and they should be able to help you

any nissan dealer should be able to give you code