When key is turned in ignition nothing happens ie the starter motor does not turn,,i find that the starter enabler fuse has blown..when this fuse is changed the car starts ok but then the fuse blows at a later date again.
It is possible that the starer is pulling too much amperage- 1st thing you need to do is find out what if any other consumers are on that circuit, 2nd you need to find out how much amperage is being consumed by the starter. 3rd test you wires most likely if a wire problem it is the heavy hot wire on the starter or the back of the alternator has a loose retaining nut
How do i take of the steering column to get to the starter wire (ignition wires) of my mercedes A class?
1,400 views
Usually answered in minutes!
good stuff.Thanks for the info Adrian
×