SOURCE: How do I remove the front interior door panel polo 1400 1999
You'll need a torx bit for the bottom screws. The door handle comes apart (using a screw driver) to expose 2 phillips screws holding the door handle to the door, after you get those out, pop the rest of the push clips out by firmly pulling on the door panel near the bottom, There may also be another screw on the TOP Front (near the mirror) very small phillips. Once you have the door panel loose, lift UP on the door panel to remove. Once you get that panel off, you'll have to remove all the other screws to get the window regulator out (lots of 10mm bolts). Unclip / unconnect the connections etc..
SOURCE: 2006 polo 3 door ,drivers door has droped hitting sill
Hi:
There are door hinge bushings that wear out, and the door sags because of it. They are not too expensive, but a little tough to install yourself. I did both doors on my wive's car for about $25.
SOURCE: remove drives door panel from v.w.
pop the cover of the handle. screws inside there. screws across bottom and dont forget there is one in the front by the speakerpod. pull the bottom straight out towards you and then up.
please rate
54 views
Usually answered in minutes!
×