At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You are sure that the CEL you have is for evap yes? The charcoal canister should actually be located under the hood of the car if I remember properly. If not it should be near the gas tank, possibliy in the trunk to the side of the carpeting. Remember after you service the car to clear the CEL.
Code P0108 means your MAP sensor circuit is open. MAP means Manifold Absolute Pressure. You should be able to buy one at your local parts store - otherwise, the dealer.
you have a random misfire problem. probably causing the car to go into "limp mode" which causes the power loss. check your ignition timing, it is probably too far advanced. if that is not the problem you may need new spark plugs/wires/cap/rotor (ignition tune-up). but check the timing first.
hi my name is mark, to reset that all you do is pull positve cable off battery and that will reset the ecm. you might check your plug wires for loose connections.
P2227 is thrown for barometric pressure circuit range/performance error. I'm researching what causes it since I have the same thing on my turbocharged Accord.
×